Help keep steering responsive and the front end pivoting smoothly with the Delphi ball joint TC4202, a front upper suspension ball joint built as a direct-fit replacement for the 2014 Chevrolet Silverado 1500 and 2014 GMC Sierra 1500. It connects the upper control arm to the steering knuckle, so the wheel can turn for steering and travel with the suspension.
- Forged construction: Delphi makes its ball joints with high-quality forgings for increased strength and smooth operation.
- Chloroprene rubber boot: Designed to improve durability and help prevent premature failure.
- Micron-tolerance machining: Machined to micron tolerances for durability and smooth joint operation.
- Anti-corrosion protection: Applied to each part to resist corrosion and give a clean finish.
Delphi brings the OE expertise behind its safety technology, which is fitted to millions of vehicles worldwide, to its aftermarket steering line. Its parts are tested at temperatures below -40°C and above 120°C and exposed to 720 hours of salt spray. Delphi's dimensional and material analysis is aimed at close compatibility between the OE part and its aftermarket part.
Signs a ball joint may need replacing include clunking over bumps, loose or wandering steering, uneven tire wear and play at the wheel. Diagnose the cause first. If a worn upper ball joint is the problem, TC4202 replaces it. See the "Vehicles it fits" section for full fitment details.
Interchange: BJ90407PR · 23420263 · 23420264 · 84628487 · K500340 · MS50575 · X07BJ0301
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
BJ90407PR, 23420263, 23420264, 84628487, K500340, MS50575, X07BJ0301
Frequently Asked Questions
Is this the right ball joint for a 2014 GMC Sierra 1500?
It is listed as a direct-fit front upper ball joint for the 2014 GMC Sierra 1500 and the 2014 Chevrolet Silverado 1500. Check the "Vehicles it fits" section to confirm your exact truck.
What does an upper ball joint do?
It forms the pivot between the upper control arm and the steering knuckle. This lets the wheel turn for steering and move up and down with the suspension.
What protects the joint from dirt and moisture?
It uses a chloroprene rubber boot that Delphi says improves durability and helps prevent premature failure. Delphi also applies anti-corrosion protection to each part.
How does Delphi test its steering parts?
Delphi tests them at temperatures below -40°C and above 120°C and exposes them to 720 hours of salt spray. The joints are machined to micron tolerances.
What are signs a ball joint may be worn?
Common signs include clunking over bumps, loose or wandering steering, uneven tire wear and play at the wheel. Diagnose the cause first, and have the alignment checked after replacement.
