Delphi TC1219 front right lower control arm with ball joint for the 1994-2002 Mercedes-Benz SL500 and other vehicles links the front right wheel to the chassis. The built-in ball joint lets the wheel pivot for steering and suspension travel.
- 100% crack detection and ultrasonic flaw detection on each Delphi control arm
- Ball studs machined to micron tolerances for durability and smooth joint operation
- Robot welding for consistent performance and quality
- Anti-corrosion protection applied to each part
- Tested below -40 degrees C and over 120 degrees C, and exposed to 720 hours of salt spray
Quick facts
- Part: Delphi TC1219 control arm with ball joint
- Also called: control arm and ball joint assembly
- Fits: 1994-2002 Mercedes-Benz SL500 and other vehicles
- Position: Front right lower
- Condition: New
A clunk over bumps, loose steering or uneven tire wear can mean a worn ball joint or a damaged arm, though other worn suspension parts can produce similar symptoms. Before replacing anything, have a shop inspect the arm for cracks, rust or a bend and test the joint for play. This control arm and ball joint assembly replaces the arm and joint in one piece.
Fits
The 1994-2002 Mercedes-Benz SL500, the 1994-1997 Mercedes-Benz SL320 and the 1995 Mercedes-Benz E300 are among the models this control arm fits. This listing is one arm for the front right; the front left is a separate part, and both sides are normally replaced together.
Specifications
Fit and size
- Position: front right lower
- Sold as: one control arm per listing
Build and materials
- Type: control arm with ball joint
- Construction: robot-welded
- Corrosion protection: anti-corrosion protection on each part
- Condition: new
Interchange: 101-6901 · 102-6901 · MB-H218 · 522-190 · 124 330 31 07 · A124 330 3107 · 507-1802
KSC5354 · CB28234 · CB28234PR · CB28244 · CK620535 · K620535 · RK620535 · FA3309 · CMS101045 · GS101045 · JTC1247 · JTC213
This part cross-references / interchanges with the following part numbers:
101-6901, 102-6901, MB-H218, 522-190, KSC5354, CB28234, CB28234PR, CB28244, CK620535, K620535, RK620535, FA3309, 124 330 31 07, A124 330 3107, CMS101045, GS101045, 507-1802, JTC1247, JTC213
Frequently Asked Questions
Is this front right lower Mercedes SL500 control arm correct for the 1994-2002 Mercedes-Benz SL500?
Yes. Delphi TC1219 is a front right lower control arm for the 1994-2002 Mercedes-Benz SL500. If your car is another model, look up its year and model in the "Vehicles it fits" section.
How are the ball studs on the Delphi TC1219 made?
Delphi machines the ball studs to micron tolerances for durability and smooth joint operation. The ball joint is part of this control arm, so it comes as one piece.
What can a worn lower control arm with ball joint feel like?
A clunk over bumps, loose steering or uneven tire wear can come from a worn ball joint or a damaged arm. Have a shop test the joint for play, and have a worn one looked at promptly.
How is the Delphi TC1219 protected against corrosion?
Each part gets anti-corrosion protection. Delphi tests these parts at temperatures below -40 degrees C and over 120 degrees C, and exposes them to 720 hours of salt spray.
Is Delphi TC1219 the same part as 507-1802?
Yes. 507-1802 is one of the numbers that Delphi TC1219 replaces. The rest of the cross-reference numbers are on the Interchange line of this description.
