Delphi TC2334 front right lower control arm with ball joint for the 2007-2013 Mercedes-Benz S550 and other vehicles links the wheel to the chassis. The ball joint is built into the arm, so the pivot and the link come as one piece.
- Tested below -40 degrees C and over 120 degrees C, and through 720 hours of salt spray
- 100% crack detection and ultrasonic flaw detection on every control arm to check the material
- Ball studs machined to micron tolerances for durability and smooth joint operation
- Robot-welded control arm for consistent performance and quality
- Anti-corrosion protection applied to each part
Quick facts
- Part: Delphi TC2334 control arm with ball joint
- Also called: control arm and ball joint assembly
- Fits: 2007-2013 Mercedes-Benz S550 and other vehicles
- Position: Front right lower rearward
- Condition: New
Clunking over bumps, loose steering or uneven tire wear can mean a worn control arm or ball joint. These signs alone do not prove this arm is the problem, since a worn tie rod end can make a similar noise.
Fits
The 2007-2013 Mercedes-Benz S550, the 2007-2013 Mercedes-Benz S600 and the 2007-2013 Mercedes-Benz S65 AMG are among the vehicles this arm fits, along with others. Open the "Vehicles it fits" section to check your exact model and engine. This listing is one arm for the front right; the matching front left arm is a separate part, and the two are normally replaced at the same time.
Specifications
Fit and size
- Position: front right lower rearward
- Quantity per application: 1
Build and materials
- Type: control arm with ball joint
- Condition: new
- Corrosion protection: anti-corrosion protection on each part
- Construction: robot-welded arm, machined ball studs
In the box
One control arm with ball joint. The front right position takes one arm.
Interchange: 101-7056 · 102-7056 · 522-244
221 330 68 07 · 221 330 82 07 · A221 330 6807 · A221 330 8207 · KSC5454 · CB28334 · CB28334PR · CK621764 · K621764 · RK621764 · CMS101206
This part cross-references / interchanges with the following part numbers:
101-7056, 102-7056, 522-244, KSC5454, CB28334, CB28334PR, CK621764, K621764, RK621764, 221 330 68 07, 221 330 82 07, A221 330 6807, A221 330 8207, CMS101206
Frequently Asked Questions
Is this S550 control arm correct for the 2007-2013 Mercedes-Benz S550, front right side?
Yes, Delphi TC2334 fits the 2007-2013 Mercedes-Benz S550 as the front right lower rearward arm with ball joint; open the "Vehicles it fits" section to check other models.
What checks does a Delphi control arm go through before it is sold?
Each Delphi TC2334 arm gets 100% crack detection and ultrasonic flaw detection. Its ball studs are machined to micron tolerances.
Is this control arm and ball joint assembly one piece?
Yes, the ball joint comes with the arm in this single front right lower rearward piece, and the front left is a separate part.
Does the TC2334 arm have protection against rust?
Yes. Anti-corrosion protection is applied to each part of this arm, and Delphi exposes its parts to 720 hours of salt spray in testing.
Does Delphi TC2334 cross-reference to number A221 330 6807?
Yes. A221 330 6807 is listed as an interchange number for Delphi TC2334, along with 221 330 68 07 and other cross-references.
