Delphi TC3030 front left upper control arm with ball joint for the 2010-2016 Land Rover LR4 connects the wheel assembly to the vehicle and lets the wheel pivot. Sold as a control arm and ball joint assembly, this Delphi control arm arrives with the joint already attached.
- Withstands temperatures below -40 degrees C and over 120 degrees C, and 720 hours of salt spray
- 100% crack detection and ultrasonic flaw detection on every control arm
- Ball studs machined to micron tolerances for durability and smooth joint operation
- Robot-welded construction for consistent performance and quality
- Anti-corrosion protection applied to each part
Quick facts
- Part: Delphi TC3030 control arm with ball joint
- Also called: control arm and ball joint assembly
- Fits: 2010-2016 Land Rover LR4
- Position: Front left upper forward
- Condition: New
A worn control arm or ball joint can show up as a clunk over bumps, uneven tire wear or loose steering. Before you replace this arm, rule out worn sway bar links, bushings and shock absorbers, since they can make similar noises.
Fits
As a control arm for the 2010-2016 Land Rover LR4, it takes one in this front left upper forward position. This listing is one arm; the opposite side is a separate part, and both sides are normally replaced together.
Specifications
Fit and size
- Position: Front left upper forward
- Quantity per vehicle: 1
- Pieces per listing: 1
Build and materials
- Type: Control arm with ball joint
- Welding: Robot welded
- Corrosion protection: Anti-corrosion protection on each part
- Condition: New
Interchange: 102-7800 · 102-7801 · 524-761
LR0 14133 · LR0 51615 · CB35057 · CB35057PR · RK622909 · CMS101224
This part cross-references / interchanges with the following part numbers:
102-7800, 102-7801, 524-761, CB35057, CB35057PR, RK622909, CMS101224, LR0 14133, LR0 51615
Frequently Asked Questions
Is the Delphi TC3030 the right control arm for the 2010-2016 Land Rover LR4?
Yes. Delphi TC3030 is the front left upper forward control arm with ball joint for the 2010-2016 Land Rover LR4. The opposite side is a separate part.
Does the ball joint come attached to this front upper control arm?
Yes. Delphi TC3030 is sold with its ball joint, and the ball studs are machined to micron tolerances.
How are Delphi control arms checked for flaws?
Each arm goes through 100% crack detection and ultrasonic flaw detection. Delphi parts are also exposed to 720 hours of salt spray.
Can a clunk over bumps point to a worn ball joint on a front upper control arm?
It can, though other worn suspension parts can make similar noises. Have the front suspension inspected promptly rather than driving on a suspected worn part.
Does number 524-761 interchange with Delphi TC3030?
Yes. 524-761 is one of the numbers cross-referenced to Delphi TC3030; the Interchange line lists the others.
