Delphi TC3311 front left lower control arm with ball joint for the 2010-2017 Volkswagen Tiguan and other vehicles joins the wheel's steering knuckle to the vehicle body. Because the ball joint is already attached, this control arm and ball joint assembly replaces the arm and the joint in one piece.
- Withstands temperatures below -40 degrees C and over 120 degrees C and 720 hours of salt spray
- Each control arm gets 100% crack detection and ultrasonic flaw detection
- Ball studs machined to micron tolerances for durability and smooth joint operation
- Robot-welded arm for consistent performance and quality
- Anti-corrosion protection applied to each part
Quick facts
- Part: Delphi TC3311 control arm with ball joint
- Also called: control arm and ball joint assembly
- Fits: 2010-2017 Volkswagen Tiguan and other vehicles
- Position: Front left lower
A clunk over bumps, loose steering or uneven tire wear can come from a worn ball joint or a bent arm, and worn parts nearby may be behind them too. With the engine off, look the arm over for cracks or bends and the joint boot for tears, and leave joint-play testing to a shop, so you replace this arm only if it is the cause.
Fits
This arm is listed for a wide range of Volkswagen models, so it is also a control arm for the 2011-2017 VW CC and the 2017-2018 Volkswagen Tiguan Limited. The 2010-2017 Volkswagen Tiguan takes one on the front left. This listing is that single arm; the front right is a separate part, and the two are normally replaced together.
Specifications
Fit and size
- Position: Front left lower
- Quantity per vehicle: 1
Build and materials
- Type: control arm with ball joint, sold as one assembly
- Construction: robot-welded arm
- Ball studs: machined to micron tolerances
- Finish: anti-corrosion protection on each part
Interchange: 102-7664 · 526-635 · 526-951
3C0 407 365 A · 5N0 407 151 · KSC6133 · CB43333 · CB43333PR · CK622854 · RK622854 · CMS701116
This part cross-references / interchanges with the following part numbers:
3C0 407 365 A, 102-7664, 526-635, 526-951, KSC6133, CB43333, CB43333PR, CK622854, RK622854, CMS701116, 5N0 407 151
Frequently Asked Questions
Is the Delphi TC3311 a VW Tiguan control arm for the 2010-2017 Volkswagen Tiguan?
Yes. Delphi TC3311 is the front left lower control arm with ball joint for the 2010-2017 Volkswagen Tiguan. If your car isn't named on this page, enter it on the Buyer's Guide tab to see whether it takes this arm.
Is this a VW Tiguan front lower control arm for the 2017-2018 Volkswagen Tiguan Limited?
Yes. Delphi TC3311 is listed for the 2017-2018 Volkswagen Tiguan Limited as the front left lower arm. The right side is a separate part.
Is this Delphi control arm tested for salt spray and temperature extremes?
Yes. It withstands temperatures below -40 degrees C and over 120 degrees C and is exposed to 720 hours of salt spray. Anti-corrosion protection is applied to each part.
How are the ball studs on this control arm made?
Delphi machines the ball studs on the TC3311 to micron tolerances, which is meant to give durability and smooth joint operation. The arm itself is robot-welded.
Does the Delphi TC3311 replace the 3C0 407 365 A control arm?
Yes. Delphi TC3311 is listed as a replacement for that number, which appears among the cross-references on the Interchange line.
