Delphi TC3312 front right control arm with ball joint for the 2010-2017 Volkswagen Tiguan and other vehicles holds the wheel to the suspension. The ball joint is part of the arm, so the control arm and ball joint assembly comes as one unit.
- Tested at temperatures below -40 degrees C and over 120 degrees C, with 720 hours of salt spray exposure
- 100% crack detection and ultrasonic flaw detection on every control arm
- Ball studs machined to micron tolerances for durability and smooth joint operation
- Robot-welded construction for consistent performance and quality
- Anti-corrosion protection applied to each part
Quick facts
- Part: Delphi TC3312 control arm with ball joint
- Also called: control arm and ball joint assembly
- Fits: 2010-2017 Volkswagen Tiguan and other vehicles
- Position: Front right, front right lower
- Condition: New
A clunk over bumps, uneven tire wear or a loose, wandering steering feel can mean a worn arm or ball joint. If this arm is the cause, this assembly replaces it. These signs alone do not prove the arm is at fault, since a worn sway bar link can make similar noises.
Fits
This arm is listed for several Volkswagen models, led by the 2010-2017 Volkswagen Tiguan front lower control arm position, the 2017-2018 Volkswagen Tiguan Limited and the 2010-2017 Volkswagen CC. This listing is one arm for the front right; the 2010-2017 Volkswagen Tiguan takes one per side, and the left arm on that axle is a separate part, normally replaced at the same time. Own a different Volkswagen? Run your car through the "Vehicles it fits" section.
Specifications
Fit and size
- Position: Front right, front right lower
- Quantity per vehicle: 1
Build and materials
- Condition: New
- Construction: robot-welded
- Ball studs: machined to micron tolerances
- Finish: anti-corrosion protection on each part
Interchange: 3C0 407 366 A · 102-7665 · 526-636 · 526-952 · 5N0 407 152
KSC6132 · CB43334 · CB43344 · CB43344PR · CK620711 · CK622855 · K620711 · RK620711 · RK622855 · CMS701117 · CMS70122
This part cross-references / interchanges with the following part numbers:
3C0 407 366 A, 102-7665, 526-636, 526-952, KSC6132, CB43334, CB43344, CB43344PR, CK620711, CK622855, K620711, RK620711, RK622855, CMS701117, CMS70122, 5N0 407 152
Frequently Asked Questions
Is this VW Tiguan control arm the right one for a 2010-2017 Volkswagen Tiguan?
Yes. Delphi TC3312 is listed for the 2010-2017 Volkswagen Tiguan in the front right lower position. The left side of that axle takes its own separate arm.
Will this VW CC control arm fit the 2010-2017 Volkswagen CC?
Yes. Delphi TC3312 is listed for the 2010-2017 Volkswagen CC, with a quantity of one for this front right position.
What tests does this Delphi control arm go through?
Delphi parts are tested below -40 degrees C and over 120 degrees C and exposed to 720 hours of salt spray. Each control arm also gets 100% crack detection and ultrasonic flaw detection.
Is the ball joint part of this control arm?
Yes. The ball joint is built into the arm as one assembly, and its ball stud is machined to micron tolerances for smooth joint operation.
How is the TC3312 control arm welded and protected from corrosion?
Delphi uses robot welding on its control arms for consistent performance and quality. Anti-corrosion protection is applied to each part.
