Delphi TC3440 front left lower control arm with ball joint for the 2014-2018 Volkswagen Passat and other vehicles locates the front left wheel and lets it pivot with steering and suspension movement. Sold as a control arm and ball joint assembly, it replaces the arm and the joint together.
- Tested to withstand temperatures below -40 degrees C and over 120 degrees C, and 720 hours of salt spray
- Delphi control arms get 100% crack detection and ultrasonic flaw detection
- Ball studs machined to micron tolerances for durability and smooth joint operation
- Robot-welded control arm for consistent performance and quality
- Anti-corrosion protection applied to each part
Quick facts
- Part: Delphi TC3440 control arm with ball joint
- Also called: control arm and ball joint assembly
- Fits: 2014-2018 Volkswagen Passat and other vehicles
- Position: Front Left Lower
- Condition: New
A worn arm or ball joint can show up as a clunk over bumps, loose steering or uneven front tire wear. Before you replace it, rule out the struts, sway bar links and tires, since they can give similar signs. Plan on doing the left and right arms as a pair: this listing is one arm for the front left, the front right is ordered separately, and the car takes one on each side of the front axle.
Fits
Besides the 2014-2018 Volkswagen Passat, the listing covers a wide range of Volkswagen and Audi models, led by the 2016-2021 Volkswagen Tiguan and the 2018-2021 Audi Q3.
Specifications
Fit and size
- Position: Front Left Lower
- Quantity per vehicle: 1 on the front left
- Sold individually: one arm per listing
Build and materials
- Type: control arm with ball joint
- Construction: robot-welded arm, machined ball studs
- Finish: anti-corrosion protection
- Condition: New
Interchange: 3Q0 407 151 E
3Q0407153B · 527069 · KSC6138 · CB43403 · CB43403PR · CMS701166
This part cross-references / interchanges with the following part numbers:
3Q0 407 151 E, 3Q0407153B, 527069, KSC6138, CB43403, CB43403PR, CMS701166
Frequently Asked Questions
Will this VW Passat control arm fit a 2014-2018 Volkswagen Passat?
Yes. Delphi TC3440 is listed for the 2014-2018 Volkswagen Passat as the front left lower arm. If your car is not named on this page, look it up in the "Vehicles it fits" section.
Is this Tiguan control arm right for the 2016-2021 Volkswagen Tiguan?
Yes. Delphi TC3440 is listed for the 2016-2021 Volkswagen Tiguan, and it goes in the front left lower position.
Does the Delphi TC3440 come with the ball joint?
Yes. Delphi TC3440 is a control arm with ball joint, so the joint is part of the assembly and does not need to be bought separately.
How is the Delphi TC3440 tested for temperature and corrosion?
Delphi parts withstand temperatures below -40 degrees C and over 120 degrees C and are exposed to 720 hours of salt spray. Anti-corrosion protection is applied to each part.
Does Delphi TC3440 replace number 3Q0407153B?
Yes. 3Q0407153B is one of the numbers this Delphi TC3440 control arm replaces, along with 527069 and KSC6138.
