Delphi Suspension Control Arm and Ball Joint Assembly P/N:TC3690
$107.99
(You save)
Help maintain steering feel and keep your front wheel properly located with the Delphi control arm (TC3690), a front right lower suspension control arm and ball joint assembly that installs as a direct-fit replacement for the 2006-2012 Suzuki Grand Vitara. The arm ties the steering knuckle to the frame while its integrated ball joint lets the wheel pivot and travel through steering and suspension movement.
OE-level validation: Delphi applies its OE steering expertise to the aftermarket, testing to the extreme — parts withstand temperatures below -40°C and over 120°C and endure 720 hours of salt spray, with dimensional and material analysis for close OE-to-aftermarket compatibility.
Inspected materials: 100% crack detection and ultrasonic flaw detection help confirm materials match OE specifications.
Precision joint: ball studs are machined to micron tolerances for durability and smooth joint operation.
Construction and finish: robot welding for consistent quality, plus anti-corrosion protection applied to each part for corrosion prevention and enhanced appearance.
If a worn arm bushing or ball joint on your 2006-2012 Suzuki Grand Vitara control arm is the cause of clunking over bumps, loose or wandering steering, or uneven front tire wear, this assembly replaces it. Sold individually for the front right lower position; the opposite side is a separate part.
What vehicle does the Delphi TC3690 control arm fit?
It is a direct-fit front right lower control arm assembly for the 2006-2012 Suzuki Grand Vitara. See the Buyer's Guide tab to confirm your exact vehicle.
Does this assembly include the ball joint?
Yes. The TC3690 is a complete assembly with an integrated ball joint machined to micron tolerances for smooth joint operation, so you replace the arm and joint together as one unit.
How does Delphi test its control arms?
Delphi applies OE steering expertise to its aftermarket parts, testing below -40°C and over 120°C plus 720 hours of salt spray, with 100% crack and ultrasonic flaw detection.
What are signs this control arm may need replacing?
Watch for clunking over bumps, loose or wandering steering, and uneven front tire wear. Have the suspension diagnosed, as these signs can have other causes.
Do I need to replace both sides?
This listing covers the front right lower position only and is sold individually. The left side is a separate part; replace it if it shows similar wear.
Write a Review
Delphi
Delphi Suspension Control Arm and Ball Joint Assembly P/N:TC3690
Keep the front suspension located and the steering precise with the Delphi Suspension Control Arm and Ball Joint Assembly (TC8449), a front left upper DELPHI control arm that installs as a direct-fit...
Keep the front suspension of your BMW tight and correctly located with the DELPHI control arm and its integrated ball joint, MPN TC9116. This control arm and ball joint assembly is a direct-fit...
Help keep your Mercedes-Benz tracking straight and steering true with the Delphi TC9360 control arm and ball joint assembly — a DELPHI control arm built as a front left lower forward unit that...
Help restore precise wheel location and smooth steering on your 2013-2019 Ford Escape with the Delphi control arm — MPN TC7889. This control arm and ball joint assembly is a direct-fit replacement...
Help keep the front-left-upper suspension tight, quiet, and precise with the DELPHI control arm — the Suspension Control Arm and Ball Joint Assembly TC8859. This unit combines the control arm and its...
WARNING:
These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to
www.P65Warnings.ca.gov.
