Delphi TC5352 front right lower control arm with ball joint for the 1995-2000 Dodge Stratus and other vehicles connects the wheel assembly to the car's frame. Sold as a control arm and ball joint assembly, it lets the wheel move up and down while the ball joint pivots as the wheel steers.
- Tested below -40 degrees C and above 120 degrees C, and exposed to 720 hours of salt spray
- 100% crack detection and ultrasonic flaw detection on the control arms
- Ball studs machined to micron tolerances for durability and smooth joint operation
- Robot welding for consistent performance and quality
- Anti-corrosion protection applied to each part
Quick facts
- Part: Delphi TC5352 control arm with ball joint
- Also called: control arm and ball joint assembly
- Fits: 1995-2000 Dodge Stratus and other vehicles
- Position: Front right lower
A clunk over bumps, loose steering or uneven tire wear can mean a worn control arm or ball joint. Those signs can also come from other suspension parts or tires, so find the cause first: look for cracks, visible damage or a bent arm with the engine off, and leave play testing to a shop.
Fits
The 1995-2000 Dodge Stratus, 1995-2000 Chrysler Cirrus and 1996-2000 Chrysler Sebring are among the vehicles this control arm fits. If your car is not one of those, open the "Vehicles it fits" section and check your exact model and engine there. Both front lower arms are usually replaced together; this listing is one arm, for the front right, and the front left is a separate part.
Specifications
Fit and size
- Position: Front right lower
- Quantity per vehicle: 1 (front right side)
Build and materials
- Type: Control arm with ball joint, sold as an assembly
- Construction: Robot-welded arm
- Ball studs: Machined to micron tolerances
- Finish: Anti-corrosion protection applied to each part
In the box
One front right lower control arm with ball joint. The front right takes one.
Interchange: 623.63043 · 461 6922 · 4764 500AC · 4764 500AE
520302 · KSC4658 · CB7427 · CB7427PR · CK7427 · RK7427 · CMK7427 · GK7427 · JTC1276
This part cross-references / interchanges with the following part numbers:
623.63043, 461 6922, 4764 500AC, 4764 500AE, 520302, KSC4658, CB7427, CB7427PR, CK7427, RK7427, CMK7427, GK7427, JTC1276
Frequently Asked Questions
Is this the right Sebring control arm for a 1996-2000 Chrysler Sebring?
Yes. Delphi TC5352 fits the 1996-2000 Chrysler Sebring as the front right lower control arm with ball joint.
Will a Chrysler Cirrus control arm like this one work on a 1995-2000 Chrysler Cirrus?
Yes. This arm fits the 1995-2000 Chrysler Cirrus on the front right lower side. The left side needs its own arm.
Does the ball joint come built into this control arm?
Yes. The ball joint is part of the assembly, so this listing is one front right lower control arm with the joint already attached.
How is this Delphi control arm tested for heat, cold and salt?
Delphi TC5352 withstands temperatures below -40 degrees C and over 120 degrees C and is exposed to 720 hours of salt spray. Anti-corrosion protection is applied to each part.
Is CB7427 an interchange number for this control arm?
Yes. CB7427 is one of the interchange numbers for Delphi TC5352, along with 520302 and KSC4658.
