Delphi TC6327 front left lower control arm with ball joint for the 2011-2012 Ram 1500 and other vehicles connects the front left wheel to the frame. The ball joint is part of the arm, so one part replaces both.
- Tested at temperatures below -40 degrees C and over 120 degrees C, and exposed to 720 hours of salt spray
- Delphi control arms get 100% crack detection and ultrasonic flaw detection
- Ball studs machined to micron tolerances for durability and smooth joint operation
- Robot-welded arm for consistent performance and quality
- Anti-corrosion protection applied to each part
Quick facts
- Part: Delphi TC6327 control arm with ball joint
- Also called: control arm and ball joint assembly
- Fits: 2011-2012 Ram 1500 and other vehicles
- Position: Front left lower
- Condition: New
A worn arm or ball joint can show up as a clunk over bumps, loose steering or uneven front tire wear. These signs alone do not prove this arm is the problem, since a worn tie rod end can feel much the same. If the arm or ball joint is the cause, this assembly replaces both.
Fits
This control arm and ball joint assembly fits the 2011-2012 Ram 1500 and the 2006-2010 Dodge Ram 1500. The 2006-2010 Dodge Ram 1500 takes one on the front left. This listing is one arm; the front right of that axle is a separate part, and the two are normally replaced together.
Specifications
Fit and size
- Position: Front left lower
- Quantity per application: 1
Build and materials
- Type: control arm with ball joint
- Construction: robot-welded arm, ball studs machined to micron tolerances
- Finish: anti-corrosion protection on each part
- Condition: New
Interchange: 55366 485AE · 55366 485AF · 55366 485AG · 55366 485AH · 68037 501AB · 68037 501AC · 522-981
55366485AC · 55366485AD · 68037501AA · CB81113 · CB81113PR · K7411 · RK621606 · CMS25194 · GS25194
This part cross-references / interchanges with the following part numbers:
55366485AC, 55366485AD, 55366 485AE, 55366 485AF, 55366 485AG, 55366 485AH, 68037501AA, 68037 501AB, 68037 501AC, 522-981, CB81113, CB81113PR, K7411, RK621606, CMS25194, GS25194
Frequently Asked Questions
Is this a lower control arm for a 2012 Ram 1500?
Yes. Delphi TC6327 is a front left lower control arm for the 2011-2012 Ram 1500, so the 2012 model year is covered.
Does this control arm also fit the 2006-2010 Dodge Ram 1500?
Yes. Delphi TC6327 fits the 2006-2010 Dodge Ram 1500 as the front left lower control arm.
How are the ball studs on TC6327 made?
The ball studs are machined to micron tolerances, which gives the joint durability and smooth operation. The arm itself is robot-welded.
Is 68037501AA an interchange number for TC6327?
Yes. Delphi TC6327 lists 68037501AA among the other numbers it replaces. The full interchange list is printed at the bottom of the page.
Does this Delphi part have corrosion protection?
Yes. Anti-corrosion protection is applied to each part, and Delphi parts are exposed to 720 hours of salt spray in testing.
