Delphi TC3543 rear left upper control arm with ball joint for the 2006-2012 Kia Sedona and other vehicles connects the wheel to the vehicle and pivots on its ball joint. Delphi applies OE expertise to its aftermarket steering parts.
- 100% crack detection and ultrasonic flaw detection on each control arm
- Ball studs machined to micron tolerances for durability and smooth joint operation
- Robot welding for consistent performance and quality
- Anti-corrosion protection applied to each part
- Delphi parts are tested below -40 °C and over 120 °C and exposed to 720 hours of salt spray
Quick facts
- Part: Delphi TC3543 control arm with ball joint
- Also called: control arm and ball joint assembly
- Fits: 2006-2012 Kia Sedona and other vehicles
- Position: Rear left upper forward
- Condition: New
A clunk over bumps, a loose feel from the rear or uneven tire wear can point to a worn arm or ball joint. These signs alone do not prove this part is the problem, since a tired shock absorber can make a similar noise. If the arm or joint is worn, this control arm and ball joint assembly replaces both.
Fits
It fits the 2006-2012 Kia Sedona, the 2014 Kia Sedona and the 2007-2010 Hyundai Entourage.
Specifications
Fit and size
- Position: rear left upper forward
- Quantity per vehicle for this position: 1
Build and materials
- Construction: robot welded control arm with ball joint
- Ball studs: machined to micron tolerances
- Finish: anti-corrosion protection
- Condition: New
In the box
One control arm with its ball joint. This listing is one arm for the rear left, and that position takes one; the rear right is a separate part ordered separately, and the two sides are normally replaced together.
Interchange: 102-5902 · 521-051 · 55250-4D000
LA63643 · LA63643PR · RK621444 · CMS901057 · GS901057
This part cross-references / interchanges with the following part numbers:
102-5902, 521-051, 55250-4D000, LA63643, LA63643PR, RK621444, CMS901057, GS901057
Frequently Asked Questions
Will the Delphi TC3543 work on a 2007-2010 Hyundai Entourage?
Yes. Delphi TC3543 fits the 2007-2010 Hyundai Entourage at the rear left upper forward position.
Does the Delphi TC3543 come with the ball joint?
Yes. This listing is one rear left upper forward control arm with its ball joint. The rear right side is a separate part.
How are the ball studs made on the Delphi TC3543?
On the Delphi TC3543, the ball studs are machined to micron tolerances for durability and smooth joint operation.
What can a worn rear control arm and ball joint feel like?
Uneven tire wear, a rattle over rough roads or a sloppy feel at the rear can mean the arm or ball joint is worn. A shop can check joint play, which needs the car raised.
Is the Delphi TC3543 interchangeable with 55250-4D000?
Yes. 55250-4D000 is one of the numbers this Delphi TC3543 replaces, as shown on the Interchange line.
