Delphi TC6794 front right upper control arm with ball joint for the 2016-2021 Jeep Grand Cherokee and other vehicles connects the wheel to the chassis and lets it pivot. This Delphi control arm is also called a control arm and ball joint assembly, so the arm and the joint are replaced as one piece.
- Withstands temperatures below -40 degrees C and over 120 degrees C; exposed to 720 hours of salt spray in testing
- Every control arm gets 100% crack detection and ultrasonic flaw detection
- Ball studs machined to micron tolerances for durability and smooth joint operation
- Robot welding for consistent performance and quality
- Anti-corrosion protection applied to each part
Quick facts
- Part: Delphi TC6794 control arm with ball joint
- Also called: control arm and ball joint assembly
- Fits: 2016-2021 Jeep Grand Cherokee and other vehicles
- Position: Front right upper
- Condition: New
A worn arm or ball joint can show up as a clunk over bumps, loose steering or uneven front tire wear. Before you replace this arm, rule out a worn tire, an alignment problem or another loose front-end part, since any of those can give you similar symptoms. The vehicle takes one upper arm on each side of the front axle; this listing is the right side only, the left is ordered separately, and the two are normally replaced together.
Fits
This suspension control arm fits the 2016-2021 Jeep Grand Cherokee, the 2016-2026 Dodge Durango and the 2022 Jeep Grand Cherokee WK.
Specifications
Fit and size
- Position: Front right upper
- Quantity per vehicle: 1 for this position
Build and materials
- Type: control arm with ball joint
- Construction: robot-welded arm with machined ball studs
- Finish: anti-corrosion protection
- Condition: New
Interchange: 68224 238AB · 68224 239AB · 68282 328AA · 68291 036AB
68291036AA · RK623433 · CMS251236
This part cross-references / interchanges with the following part numbers:
68224 238AB, 68224 239AB, 68282 328AA, 68291036AA, 68291 036AB, RK623433, CMS251236
Frequently Asked Questions
Is this upper control arm right for the 2016-2021 Jeep Grand Cherokee?
Yes. Delphi TC6794 is the front right upper control arm with ball joint for the 2016-2021 Jeep Grand Cherokee. The left side is a separate part.
Will this control arm fit the 2016-2026 Dodge Durango?
Yes. This front right upper arm is listed for the 2016-2026 Dodge Durango, and the left upper arm is ordered separately.
Does the Delphi TC6794 control arm come with the ball joint?
Yes. Delphi TC6794 is a control arm with ball joint, so the joint is part of the arm, and its ball studs are machined to micron tolerances.
Does this control arm have corrosion protection?
Yes. Anti-corrosion protection is applied to each part, and Delphi parts are exposed to 720 hours of salt spray.
Does Delphi TC6794 replace part number 68291 036AB?
Yes. 68291 036AB is on the interchange list for Delphi TC6794, a front right upper control arm with ball joint.
