Delphi TC7721 front right lower control arm with ball joint for the 2002-2005 Dodge Ram 1500 connects the steering knuckle to the frame. Sold as a control arm and ball joint assembly, it replaces the arm and its joint together.
- Tested for temperatures below -40 degrees C and over 120 degrees C, and for 720 hours of salt spray
- Delphi control arms go through 100% crack detection and ultrasonic flaw detection
- Ball studs machined to micron tolerances for durability and smooth joint operation
- Robot-welded construction for consistent performance and quality
- Anti-corrosion protection applied to each part
Quick facts
- Part: Delphi TC7721 control arm with ball joint
- Also called: control arm and ball joint assembly
- Fits: 2002-2005 Dodge Ram 1500
- Position: Front right lower
- Condition: New
A worn lower control arm or ball joint can show up as a clunk over bumps, loose steering or uneven front tire wear, but other suspension parts cause the same signs. With the engine off, look the arm over for cracks, bends or rust, and have a shop test the joint for play before you replace the arm.
Fits
This suspension control arm fits the 2002-2005 Dodge Ram 1500 on the front right lower side. That side takes one; the front left is a separate part, and the two sides are normally replaced together.
Specifications
Fit and size
- Position: front right lower
- Quantity per vehicle: 1 for this side
- Sold individually
Build and materials
- Construction: robot welded
- Corrosion protection: anti-corrosion protection on each part
- Ball studs: machined to micron tolerances
- Condition: New
Interchange: 52106 558AF · 52-1936 · 524-078
526035 · CA85593PR · CB81284 · CB81284PR · RK621602 · RK643390 · CMS251151 · CMS401175 · GS251151
This part cross-references / interchanges with the following part numbers:
52106 558AF, 52-1936, 524-078, 526035, CA85593PR, CB81284, CB81284PR, RK621602, RK643390, CMS251151, CMS401175, GS251151
Frequently Asked Questions
Will this control arm work as a 2002-2005 Dodge Ram 1500 control arm on the front right side?
Yes. Delphi TC7721 is the front right lower control arm with ball joint for the 2002-2005 Dodge Ram 1500. The front left side is a separate part.
How are the ball studs on this front right lower control arm made?
The ball studs are machined to micron tolerances for durability and smooth joint operation, and the control arms are robot welded for consistent performance and quality.
Is every TC7721 arm checked for cracks?
Yes. Every Delphi TC7721 arm goes through 100% crack detection and ultrasonic flaw detection to check the material.
Is this front right control arm tested for road salt and temperature extremes?
Yes. Delphi parts are tested for 720 hours of salt spray and for temperatures below -40 degrees C and over 120 degrees C, and anti-corrosion protection is applied to each part.
Does Delphi TC7721 cross to the 524-078 number?
Yes. 524-078 is on the Interchange line for the Delphi TC7721 front right lower control arm with ball joint.
