Delphi TC8448 front right upper control arm with ball joint for the 2017-2024 Volvo S90 and other vehicles links the wheel to the chassis and pivots on its ball joint. This control arm and ball joint assembly supplies the arm and the joint as one unit.
- Withstands temperatures below -40 degrees C and over 120 degrees C and is exposed to 720 hours of salt spray
- 100% crack detection and ultrasonic flaw detection on Delphi control arms
- Ball studs machined to micron tolerances for smooth joint operation
- Robot-welded control arm for consistent performance and quality
- Anti-corrosion protection applied to the part
Quick facts
- Part: Delphi TC8448 control arm with ball joint
- Also called: control arm and ball joint assembly
- Fits: 2017-2024 Volvo S90 and other vehicles
- Position: Front right upper
- Condition: New
A clunk over bumps, uneven tire wear or vague steering can mean a worn control arm or ball joint. Before you replace this arm, rule out worn bushings, links and shocks, since other worn suspension parts make similar noises. This listing is one front right upper arm; the left side is a separate part, and both sides are normally replaced together.
Fits
The vehicles it fits include the 2017-2024 Volvo S90, the 2019-2024 Volvo V60 Cross Country and the 2017-2021 Volvo V90 Cross Country. If your car is not named here, open the "Vehicles it fits" section and check your exact model and engine.
Specifications
Fit and size
- Position: Front right upper
- Quantity for this position: 1
Build and materials
- Type: Control arm with ball joint
- Finish: Anti-corrosion protection
- Condition: New
- Country of origin: Turkey
In the box
One control arm with ball joint. The front right upper position takes one, and the left side is ordered separately.
Interchange: 1028268 · KSC6196 · RK623023 · X53CJ1054 · 31360837
This part cross-references / interchanges with the following part numbers:
1028268, KSC6196, RK623023, X53CJ1054, 31360837
Frequently Asked Questions
Does the Delphi TC8448 fit the 2019-2024 Volvo V60 Cross Country?
Yes. Delphi TC8448 fits the 2019-2024 Volvo V60 Cross Country in the front right upper position. Open the "Vehicles it fits" section to check other models.
Which side and position is this Delphi TC8448 control arm made for?
Delphi TC8448 is made for the front right upper position. The left side takes its own arm, which is a separate part.
Is the ball joint included with this control arm?
Yes. This listing is one control arm with its ball joint, and the front right upper position takes one.
What corrosion protection does this control arm have?
Anti-corrosion protection is applied to the part. Delphi parts are also exposed to 720 hours of salt spray.
What noises can a worn front upper control arm make?
A worn arm or ball joint can show up as a clunk over bumps, uneven tire wear or loose steering. A shop can test the joint, and a worn one needs prompt attention.
