Delphi TC9017 front right upper control arm with ball joint for the 2014-2019 Infiniti Q70 and other vehicles links the wheel to the suspension. It is a control arm and ball joint assembly, so the joint comes as part of the arm and one piece replaces both.
- 100% crack detection and ultrasonic flaw detection on every control arm
- Ball studs machined to micron tolerances for durability and smooth joint operation
- Robot-welded control arm for consistent performance and quality
- Anti-corrosion protection applied to each part
- Tested below -40 degrees C and over 120 degrees C, and exposed to 720 hours of salt spray
Quick facts
- Part: Delphi TC9017 control arm with ball joint
- Also called: control arm and ball joint assembly
- Fits: 2014-2019 Infiniti Q70 and other vehicles
- Position: Front right upper
- Condition: New
A clunk over bumps or uneven tire wear can mean a worn arm or ball joint, but worn tires or other suspension parts can produce similar signs, so find the cause first. With the engine off, look over the arm and ball joint for cracks, rust or a torn boot. The car takes one upper arm on each side of the front axle, and the pair is normally replaced together; this listing is the front right only, and the left is ordered separately.
Fits
The 2014-2019 Infiniti Q70, the 2015-2019 Infiniti Q70L and the 2011-2013 Infiniti M37 take this Delphi control arm, and it fits more Infiniti models too. Driving a different one? Run your year and model through the "Vehicles it fits" section.
Specifications
Fit and size
- Position: Front right upper
- Quantity per application: 1
Build and materials
- Type: control arm with ball joint assembly
- Corrosion protection: anti-corrosion treatment on each part
- Condition: New
Interchange: 54524-1MA0A · 526-690
CB61118 · CMS301250
This part cross-references / interchanges with the following part numbers:
54524-1MA0A, 526-690, CB61118, CMS301250
Frequently Asked Questions
Does the Delphi TC9017 fit the 2014-2019 Infiniti Q70?
Yes. Delphi TC9017 is the front right upper control arm with ball joint for the 2014-2019 Infiniti Q70. The 2015-2019 Infiniti Q70L is on the fitment list as well.
Does this Delphi control arm come with the ball joint?
Yes. This front right upper arm is sold as an assembly, so the ball joint is part of the piece and does not need to be bought separately.
What testing do Delphi control arms go through?
Every arm gets 100% crack and ultrasonic flaw detection. The parts are tested below -40 degrees C and over 120 degrees C and exposed to 720 hours of salt spray.
How do I know the front upper control arm or its ball joint is worn?
Loose-feeling steering, a knock from the front end over bumps or uneven front tire wear can mean wear. A shop can test the joint for play, and a car with these signs should be checked promptly.
Does Delphi TC9017 interchange with 54524-1MA0A?
Yes. 54524-1MA0A is listed as an interchange number for Delphi TC9017, along with 526-690, CB61118 and CMS301250.
