Front Left Upper Control Arm with Ball Joint for 1990-1993 Honda Accord - Delphi TC941

$76.99
WARNING:California Proposition 65▾

Vehicles this part fits

    Part number: TC941
    UPC: 689604260708
    Condition: New
    Weight: 6.18 LBS
    Item Package Quantity: 1
    $76.99
    Adding to cart… The item has been added

    Have questions?

    Delphi Suspension Control Arm and Ball Joint Assembly P/N:TC941
    Delphi Suspension Control Arm and Ball Joint Assembly P/N:TC941
    $76.99
    $76.99

    Delphi TC941 front left upper control arm with ball joint for the 1990-1993 Honda Accord links the steering knuckle to the car and lets the wheel pivot. This control arm and ball joint assembly carries the joint that swivels as the suspension moves and the car steers.

    • Ball studs machined to micron tolerances for smooth joint operation
    • Robot welding for consistent performance and quality
    • Anti-corrosion protection applied to each part
    • 100% crack detection and ultrasonic flaw detection on each control arm
    • Tested at temperatures below -40 degrees C and over 120 degrees C, and exposed to 720 hours of salt spray

    Quick facts

    • Part: Delphi TC941 control arm with ball joint
    • Also called: control arm and ball joint assembly
    • Fits: 1990-1993 Honda Accord
    • Position: Front left upper forward
    • Condition: New

    A worn arm or joint can show up as a clunk over bumps, uneven tire wear or steering that pulls to one side. Worn tires, struts, tie rod ends or wheel bearings can be behind those signs too, so find the cause before buying a new arm.

    Fits

    This is a direct-fit replacement for the 1990-1993 Honda Accord. The listing is one arm for the front left upper forward position. This side of the 1990-1993 Honda Accord takes one, the other side is ordered separately, and the two sides are normally replaced together.

    Specifications

    Fit and size

    • Position: Front left upper forward
    • Quantity per vehicle: 1 for this side

    Build and materials

    • Construction: robot-welded control arm with ball joint
    • Ball stud: machined to micron tolerances
    • Corrosion protection: anti-corrosion protection applied to each part
    • Condition: New

    Interchange: 101-4333 · 102-4333 · 520-639 · 51460-SM4-013 · 51460-SM4-023
    51460SM4A02 · 51460SM4A03 · 51460SN7003 · GSJ423 · CB9816 · CB9816PR · CK9816 · K9816 · RK9816 · FA4038 · CMK9816 · GK9816 · JTC987

    Product information is for general reference and may contain errors. See our Disclaimer.

    This part cross-references / interchanges with the following part numbers:

    101-4333, 102-4333, 520-639, 51460-SM4-013, 51460-SM4-023, 51460SM4A02, 51460SM4A03, 51460SN7003, GSJ423, CB9816, CB9816PR, CK9816, K9816, RK9816, FA4038, CMK9816, GK9816, JTC987

    Frequently Asked Questions

    Is the Delphi TC941 the right upper control arm for a 1990-1993 Honda Accord?

    Yes. Delphi TC941 fits the 1990-1993 Honda Accord in the front left upper forward position. The right side is a separate part.

    How is the ball stud made on this Delphi control arm?

    The ball studs on this front left control arm are machined to micron tolerances for smooth joint operation. The arm itself is robot-welded.

    What can a worn upper control arm ball joint cause while driving?

    A clunk over bumps, uneven tire wear or the car pulling to one side can be signs of a worn control arm or ball joint. A shop can measure the joint play.

    Is the Delphi TC941 protected against rust?

    Yes. Anti-corrosion protection is applied to each Delphi TC941, and Delphi control arms are exposed to 720 hours of salt spray in testing.

    Does the Delphi TC941 replace 51460-SM4-013?

    Yes. Delphi TC941 replaces 51460-SM4-013, one of the numbers on the Interchange line.

    Reviews

    No reviews yet — be the first to review this product.

    Write a Review