Locate the front lower forward control arm and keep suspension movement controlled with the Delphi Suspension Control Arm Bushing TD4012W. This suspension control arm bushing drops in as a direct-fit replacement for the 2000-2003 Toyota Echo (see the "Vehicles it fits" section for engine details), cushioning the connection between the control arm and its mounting point so the arm pivots quietly and stays properly located.
- OE-standard engineering: Delphi applies its OE steering and suspension expertise to the aftermarket, with extensive dimensional and material analysis for close compatibility between the OE and aftermarket part.
- Tested to the extreme: withstands temperatures below -40°C and over 120°C and endures 720 hours of salt-spray exposure.
- Consistent life, less noise: manufactured for consistent service life and to help reduce noise and vibration.
- Complete job: includes the necessary accessories for the installation.
Worn control arm bushings can show up as clunking on acceleration, deceleration or over bumps, imprecise handling, and uneven tire wear; if a failed bushing is the cause, this Delphi unit replaces it. Front bushings typically wear as a pair, so inspect and service both sides for balanced suspension geometry.
Interchange: 101-4762 · 101-4763 · 101-7697 · 101-7715 · 102-4762 · 102-4763 · 520-431 · 520-432 · 48068-59035 · 48069-59035
1014762 · 1014763 · 1017697 · 1017715 · 1024762 · 1024763 · 520431 · 520432 · 4806859035 · 4806959035 · CB74013 · CB74013PR · CB74014 · CB74014PR · K500118 · RK620364 · RK620365 · MK90310 · JTC990 · JTC991
This part cross-references / interchanges with the following part numbers:
101-4762, 101-4763, 101-7697, 101-7715, 102-4762, 102-4763, 520-431, 520-432, CB74013, CB74013PR, CB74014, CB74014PR, K500118, RK620364, RK620365, MK90310, JTC990, JTC991, 48068-59035, 48069-59035
Frequently Asked Questions
What vehicles does the Delphi TD4012W bushing fit?
It is a direct-fit replacement for the 2000-2003 Toyota Echo. Check the "Vehicles it fits" section to confirm the correct application for your vehicle.
What position is this control arm bushing for?
It is cataloged for the front lower forward position, cushioning and locating the control arm at its mounting point.
What does a suspension control arm bushing do?
It cushions the joint between the control arm and its mount, helping the arm pivot smoothly while locating it and reducing noise and vibration.
What are the signs this bushing may need replacing?
Clunking on acceleration, deceleration or over bumps, looser or imprecise handling, and uneven tire wear. Diagnose the cause before replacing.
Does it come with installation accessories?
Yes. Delphi includes the necessary accessories for a complete job. Bushings often wear in pairs, so consider servicing both sides together.
