Delphi TC3485 front right lower control arm for the 2005-2010 Hyundai Sonata connects the wheel to the body and guides suspension travel. This Delphi control arm replaces one that is bent, cracked or worn.
- Control arm tested below -40 degrees C and over 120 degrees C, and exposed to 720 hours of salt spray
- 100% crack detection and ultrasonic flaw detection on every control arm
- Robot welding for consistent performance and quality
- Ball studs machined to micron tolerances for durability and smooth joint operation
- Anti-corrosion protection applied to each control arm
Quick facts
- Part: Delphi TC3485 control arm
- Also called: suspension control arm
- Fits: 2005-2010 Hyundai Sonata
- Position: Front right lower
- Condition: New
A worn suspension control arm can show up as a clunk over bumps, uneven tire wear or pulling to one side, but tires, struts and alignment problems can feel much the same. With the engine off and the car parked, look the arm over for bends, cracks or rust before you order a replacement. Both front lower arms are normally replaced together; this listing is one arm for the front right, and the front left is its own part.
Fits
This is a direct-fit 2005-2010 Hyundai Sonata control arm replacement for the front right lower position, and that car takes one on this side.
Specifications
Fit and size
- Position: front right lower
- Quantity: 1 for the front right
Build and materials
- Condition: new
- Construction: robot-welded
- Finish: anti-corrosion protection
Interchange: 102-7155 · 623.51842 · 52-1748 · 54501-3K060 · 54501-3K500
545013K000 · CA60164 · CA60164PR · CK641391 · RK641391 · CMS90167 · JTC2448
This part cross-references / interchanges with the following part numbers:
102-7155, 623.51842, 52-1748, 545013K000, 54501-3K060, 54501-3K500, CA60164, CA60164PR, CK641391, RK641391, CMS90167, JTC2448
Frequently Asked Questions
Is this a lower control arm for the 2005-2010 Hyundai Sonata?
Yes. Delphi TC3485 is the front right lower control arm for the 2005-2010 Hyundai Sonata, and the front left is a separate part.
How is this control arm checked for cracks and flaws?
Every Delphi TC3485 control arm goes through 100% crack detection and ultrasonic flaw detection to confirm the materials match OE specifications.
Is this arm tested for cold, heat and salt?
Yes. Delphi parts are tested below -40 degrees C and over 120 degrees C and are exposed to 720 hours of salt spray, and each arm has anti-corrosion protection.
Can a worn front lower arm show up as uneven tire wear?
It can, along with a clunk over bumps or pulling to one side, though other suspension problems cause these too. A shop can test the joint and the rest of the front end.
Does Delphi TC3485 cross-reference to 54501-3K060?
Yes. Delphi TC3485 is listed as a replacement for 54501-3K060. The other cross-reference numbers are on the Interchange line.
