Delphi TC7402 front lower control arm for the 2011-2012 Ram 4500 and other vehicles holds the front wheel in position as the suspension moves. It is also listed as a suspension control arm, and it replaces a worn or damaged arm.
- Delphi control arms undergo 100% crack detection and ultrasonic flaw detection
- Robot welding for consistent performance and quality
- Ball studs machined to micron tolerances for durability and smooth joint operation
- Anti-corrosion protection applied to each part
- Delphi testing covers temperatures below -40 degrees C and over 120 degrees C, plus 720 hours of salt spray
Quick facts
- Part: Delphi TC7402 control arm
- Also called: suspension control arm
- Fits: the 2011-2012 Ram 4500 and other vehicles
- Position: Front lower
- Condition: New
A clunk over bumps, loose-feeling steering or uneven front tire wear can mean a front lower control arm is worn. Before you replace this arm, rule out worn shocks, tie rod ends and wheel-bearing play, since those can show up the same way. Control arms are normally replaced as a pair across the axle, and this listing is one arm.
Fits
The vehicles covered include the 2011-2012 Ram 4500, the 2011-2012 Ram 5500 and the 2008-2010 Dodge Ram 4500.
Specifications
Fit and size
- Position: Front lower
- Quantity per vehicle: 2
Build and materials
- Construction: robot-welded
- Ball studs: machined to micron tolerances
- Finish: anti-corrosion protection on each part
- Condition: New
In the box
One front lower control arm. These vehicles take two, so a pair needs two listings.
Interchange: 6806-9650AA
68069650AB · RK643222 · CMS251145 · GS251145
This part cross-references / interchanges with the following part numbers:
6806-9650AA, 68069650AB, RK643222, CMS251145, GS251145
Frequently Asked Questions
Is Delphi TC7402 the right front lower control arm for the 2011-2012 Ram 4500?
Yes. Delphi TC7402 is a front lower control arm for the 2011-2012 Ram 4500. For another vehicle, look up its year and model in the "Vehicles it fits" section.
How are the ball studs on this control arm made?
Delphi machines the ball studs to micron tolerances, which gives durability and smooth joint operation.
Does the Delphi TC7402 have rust protection?
Yes. Delphi TC7402 has anti-corrosion protection applied to each part, and Delphi parts are exposed to 720 hours of salt spray in testing.
How can I tell if a front lower control arm is worn?
Look for cracks, bends or heavy rust on the arm with the engine off, and notice any clunk over bumps. Play in the joint means lifting the vehicle, so a shop should check that.
Is 6806-9650AA the same as Delphi TC7402?
Yes. Delphi TC7402 is listed as a replacement for 6806-9650AA. The other cross-reference numbers are on the Interchange line of this page.
