Delphi Suspension Stabilizer Bar Link Kit P/N:TC2288
$38.99
(You save)
Keep your stabilizer bar working with the body roll and your suspension planted through the corners with the Delphi Suspension Stabilizer Bar Link Kit (TC2288). This is the REAR LEFT link, a direct-fit replacement for the 2007-2013 Mitsubishi Outlander (see the Buyer's Guide tab for engine-level fitment). The sway bar link ties the stabilizer bar to the suspension so the bar can resist lean; worn links are a common source of clunks or rattles over bumps, loose handling, and excess body roll.
Built to Delphi OE standards: Delphi applies its OE steering and suspension expertise to the aftermarket, with extensive dimensional and material analysis for compatibility between the OE and aftermarket part.
Tested to the extreme: validated below -40°C and over 120°C and exposed to 720 hours of salt spray, and fatigue tested to help avoid failure.
Ultrasonic molding: manufactured with ultrasonic molding to help prevent future weld breakage.
Precision and protection: machined to micron tolerances for durability and smooth joint operation, with anti-corrosion protection applied to each part.
This is a stabilizer bar link kit sold for the REAR LEFT position; for even handling, inspect the opposite side and replace worn links as needed.
It is a direct-fit sway bar link for the 2007-2013 Mitsubishi Outlander. See the Buyer's Guide tab for engine-level fitment details.
What position is this link for?
This kit is for the REAR LEFT position. Check the opposite side as well and replace worn links as needed for balanced handling.
What does a sway bar link do?
It connects the stabilizer (sway) bar to the suspension so the bar can resist body roll during cornering, helping keep the vehicle stable.
What are signs the link may need replacing?
Clunking or rattling over bumps, looser-feeling handling, or increased body roll can be signs. Have the suspension inspected to confirm the cause before replacing.
How is the Delphi link protected against corrosion?
Anti-corrosion protection is applied to each part, and Delphi validates its links through 720 hours of salt spray and extreme-temperature testing from below -40°C to over 120°C.
Write a Review
Delphi
Delphi Suspension Stabilizer Bar Link Kit P/N:TC2288
Delphi's OE safety technology is fitted to millions of vehicles worldwide and we apply Delphi's OE expertise to our aftermarket steering portfolio. Delphi tests to the extreme for OE performance at...
Delphi's OE safety technology is fitted to millions of vehicles worldwide and we apply Delphi's OE expertise to our aftermarket steering portfolio. Delphi tests to the extreme for OE performance at...
Tie the front stabilizer bar to the suspension and help control body roll through every corner with the Delphi Suspension Stabilizer Bar Link Kit (TC2265). This front sway bar link kit is a...
Quiet a clunking front end and help keep body lean in check with the Delphi Suspension Stabilizer Bar Link Kit TC8477. This front sway bar link connects the stabilizer bar to the suspension on the...
Steady your handling and keep the stabilizer bar connected to the suspension with the Delphi Suspension Stabilizer Bar Link Kit TC3354. This front right unit drops in as a direct-fit replacement for...
WARNING:
These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to
www.P65Warnings.ca.gov.
