Delphi TC973 rear sway bar link kit for the 2000-2003 BMW Z8 and other vehicles connects the rear sway bar to the suspension to limit body roll.
- Withstands temperatures below -40 degrees C and over 120 degrees C, plus 720 hours of salt spray exposure
- Fatigue tested to avoid link failure
- Ultrasonic molding to help prevent future weld breakage
- Machined to micron tolerances for durability and smooth joint operation
- Anti-corrosion protection applied to each part
Quick facts
- Part: Delphi TC973 sway bar link kit
- Also called: stabilizer bar link kit
- Fits: 2000-2003 BMW Z8 and other vehicles
- Position: Rear
- Condition: New
When a stabilizer bar link kit wears, you may notice a knock or rattle from the rear over bumps, or more body lean in turns. Before you replace the links, rule out worn rear bushings or shock mounts, which can make a similar noise.
Fits
As a rear sway bar link kit, it fits the 2000-2003 BMW Z8, the 1997-2001 BMW 740i and the 1995-2001 BMW 740iL, with two links per car.
Specifications
Fit and size
- Position: Rear
- Quantity per vehicle: 2
Build and materials
- Condition: New
- Construction: ultrasonic molding
- Finish: anti-corrosion protection on each part
Interchange: 101-4946 · BW-L611 · 545-1100
3355 1091 497 · 3355 1095 696 · LS02084 · KSLR4080 · SL14500 · SL14500PR · SL14500XL · K80236 · SL297 · GK80236 · MK80236 · JTS353
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
3355 1091 497, 3355 1095 696, 101-4946, BW-L611, LS02084, KSLR4080, SL14500, SL14500PR, SL14500XL, K80236, SL297, GK80236, MK80236, 545-1100, JTS353
Frequently Asked Questions
Does the Delphi TC973 fit a 1997-2001 BMW 740i?
Yes, the Delphi TC973 rear sway bar link kit fits the 1997-2001 BMW 740i and the 1995-2001 BMW 740iL. For any other car, look it up in the "Vehicles it fits" section.
Is the TC973 sway bar link kit for the front or the rear?
Rear. Delphi TC973 is a rear-position sway bar link kit.
How are these Delphi links protected against rust?
Anti-corrosion protection is applied to each part, and the parts are exposed to 720 hours of salt spray.
What does a worn rear sway bar link sound like?
A worn link can knock or rattle over bumps, and the body may lean more in turns. A shop can inspect the joints for play.
Why does this link kit use ultrasonic molding?
The ultrasonic molding is meant to help prevent future weld breakage, and the links are fatigue tested to avoid failure.
