Delphi TC2536 rear left sway bar link for the 2014-2017 BMW i8 and other vehicles connects the sway bar to the rear left suspension. This Delphi sway bar link, also called a stabilizer bar link, helps limit body lean in corners.
- Ultrasonic molding to help prevent weld breakage later
- Fatigue tested to avoid failure
- Machined to micron tolerances for durability and smooth joint operation
- Tested below -40 °C, above 120 °C and for 720 hours of salt spray
Quick facts
- Part: Delphi TC2536 sway bar link
- Also called: stabilizer bar link
- Fits: 2014-2017 BMW i8 and other vehicles
- Position: Rear left
- Condition: New
A clunk or rattle over bumps, or play you can see in the joint with the car parked, can mean this link is worn. A worn sway bar bushing or a worn control arm bushing can also be behind a clunk, so find the source before you replace anything.
Fits
The 2014-2017 BMW i8, the 2017-2020 BMW 230i and the 2017-2020 BMW 230i xDrive take this link, along with many other BMW models. If your car is not named here, look it up in the "Vehicles it fits" section. This listing is the rear left side only; the rear right link is a separate part, and the two are normally replaced at the same time.
Specifications
Fit and size
- Position: Rear left
- Quantity per vehicle: 1
Build and materials
- Condition: New
- Corrosion protection: anti-corrosion protection applied to each part
In the box
One rear left sway bar link. This listing holds one link, and the rear left takes one.
Interchange: 101-7987
3350 6785 607 · LS17132 · KSLR4063 · SL14501 · K750676 · MS108185 · JTS1661
This part cross-references / interchanges with the following part numbers:
3350 6785 607, 101-7987, LS17132, KSLR4063, SL14501, K750676, MS108185, JTS1661
Frequently Asked Questions
Does the Delphi TC2536 fit the 2017-2020 BMW 230i?
Yes. Delphi TC2536 fits the 2017-2020 BMW 230i as the rear left link, and that side takes one.
Which side of the car is the Delphi TC2536 for?
Delphi TC2536 is the rear left link. The rear right is a separate part, and this listing holds one link.
Is this sway bar link fatigue tested?
Yes. Delphi fatigue tests its sway bar links to avoid failure, and machines them to micron tolerances for durability and smooth joint operation.
What noises can a worn rear sway bar link make?
A clunk or rattle over bumps, or visible play in the joint with the car parked, can be signs of a worn link. A shop can confirm which suspension part is making the noise.
How does Delphi TC2536 hold up to cold, heat and salt?
Delphi tests these parts below -40 °C and above 120 °C, and exposes them to 720 hours of salt spray. Anti-corrosion protection is applied to each part.
