PowerStop L4825 rear left brake caliper for the 1994-2004 Ford Mustang squeezes the brake pads against the rotor to slow the car. Like other PowerStop brake calipers, it bolts on in place of the original stock caliper.
- Part of the Autospecialty by PowerStop Replacement Brake Caliper line
- Floating caliper with one 38.10 mm steel piston and an integrated mechanical parking brake
- New seals, caliper guide pins and a bleeder screw
- New high temperature EPDM rubber dust boots and assembly lubricant for smooth caliper operation
- 100% pressure tested and inspected for reliable brake performance
Quick facts
- Part: PowerStop L4825 brake caliper
- Also called: disc brake caliper
- Fits: 1994-2004 Ford Mustang
- Position: Rear left
- Material: Cast iron caliper casting, steel piston
- Condition: New
Uneven pad wear, pulling to one side or a leak at the caliper can mean it is failing. A worn rotor, worn pads or a damaged brake hose can be behind these signs too, so find the cause before you buy. This listing is one caliper for the rear left; the rear axle takes one per side, and both sides are normally replaced together.
Fits
This disc brake caliper fits the rear left of the 1994-2004 Ford Mustang.
Specifications
Fit and size
- Position: Rear left
- Quantity per application: 1
- Piston diameter: 38.10 mm
- Piston quantity: 1
- Bleeder screw quantity: 1
Build and materials
- Caliper type: Floating
- Caliper casting material: Cast iron
- Piston material: Steel
- Integrated parking brake: Yes, mechanical
- Condition: New
- Country of origin: China
In the box
One rear left brake caliper with caliper slides and crush washers. Brake pads, the mounting bracket, mounting hardware and bolts, a pad wear sensor and caliper grease are not included; plan on new mounting bolts rather than reusing the old ones.
Frequently Asked Questions
Does the PowerStop L4825 caliper fit the rear left of a 1994-2004 Ford Mustang?
Yes. PowerStop L4825 is a rear left caliper for the 1994-2004 Ford Mustang. The listing is one caliper, so the rear right side is ordered separately.
Do I need to buy pads and mounting bolts separately for this rear left caliper?
Yes. This caliper comes with caliper slides and crush washers. Brake pads, the mounting bracket, mounting hardware and bolts are not included, so plan on new bolts.
What size is the piston on the PowerStop L4825 caliper?
PowerStop L4825 has one steel piston that is 38.10 mm in diameter, in a floating caliper with a cast iron body.
How can I tell a rear caliper is sticking or leaking?
Signs can include the car pulling to one side, brake fluid around the caliper or a parking brake that no longer holds. A shop can confirm the cause.
Does this rear left caliper have the parking brake built in?
Yes. This caliper has an integrated mechanical parking brake, so the parking brake function is part of the caliper itself.
