Dorman - First Stop Brake Hydraulic Hose P/N:H621332
$36.99
(You save)
Keep the rear-left brake circuit flexing safely and carrying fluid under pressure with the Dorman First Stop Brake Hydraulic Hose H621332. It installs as a direct-fit replacement for the 2009-2010 Dodge Ram 1500 (All), precision-built to the correct measurements so it matches the original hose's fit, function and performance in the factory position. This is the flexible link that lets pressurized brake fluid pass from the chassis-side line to the moving wheel end while the suspension and wheels travel.
EPDM rubber construction: flexible EPDM rubber hose with a rubber outer sleeve to handle repeated flexing.
Corrosion-resistant fittings: a banjo fitting at end 1 and a female fitting at end 2, both treated steel and specially coated to resist corrosion.
Position-specific fit: made for the rear-left location, roughly 16.5 in overall, with a 10 mm end-1 thread and an M10 x 1.0 end-2 fitting.
DOT approved: materials tested to exacting government-regulated safety and durability standards; includes gaskets. Mounting hardware and bracket are not included.
Cracked, bulging, or leaking rubber and a soft or spongy pedal are common signs a brake hose may need replacing. Country of origin: China.
Interchange: 613152 · 150.67408 · 55398309AE · 350-40303 · 35040303 · BH383632 · 2206296 · Manufacturer part number H621332.
This part cross-references / interchanges with the following part numbers:
It's the flexible line that carries pressurized brake fluid from the chassis-side hard line to the moving wheel end, flexing as the suspension and wheels travel.
What vehicle does the H621332 fit?
It's a direct-fit replacement for the 2009-2010 Dodge Ram 1500 (All). See the Buyer's Guide tab to confirm the fit for your vehicle.
What position is this hose for?
It's manufactured for the rear-left position, built to precise measurements for an exact fit in the factory location.
What's included, and are the fittings included?
Gaskets are included. It has a banjo fitting at end 1 and a female fitting at end 2. Mounting hardware and a bracket are not included.
What is this hose made of?
The hose is EPDM rubber with a rubber outer sleeve, and the end fittings are treated steel with a corrosion-resistant coating. It is DOT approved.
Write a Review
Dorman
Dorman - First Stop Brake Hydraulic Hose P/N:H621332
The Dorman - First Stop Brake Hydraulic Hose H38426 is the flexible link that carries pressurized brake fluid from the frame-mounted steel line to the brake at the wheel, flexing with suspension...
Keep pressurized brake fluid moving from the hard line to the caliper with the Dorman - First Stop Brake Hydraulic Hose (H620396), a flexible brake hose that flexes with suspension and steering...
WARNING:
These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to
www.P65Warnings.ca.gov.
