Dorman CC649038 clutch master and slave cylinder assembly for the 2005-2008 Dodge Ram 1500 V6 3.7L, V8 4.7L or 5.7L and other vehicles turns clutch pedal force into hydraulic pressure that works the clutch. The master cylinder, slave cylinder and fluid line come as one unit.
- Dorman First Stop line at standard replacement grade
- Reverse-engineered from the original clutch master and slave cylinder
- EPDM rubber components made to work with brake fluid
- Pre-filled and pre-bled fluid line for immediate performance after installation
Quick facts
- Part: Dorman CC649038 clutch master and slave cylinder assembly
- Fits: the 2005-2008 Dodge Ram 1500 V6 3.7L, V8 4.7L or 5.7L and other vehicles
- Condition: New
A soft or sinking clutch pedal, a clutch that will not release cleanly or fluid near the cylinders can mean the master or slave cylinder is wearing out. Before you replace anything, look over the line, both cylinders and the reservoir for wet fluid with the engine off, because a worn clutch can feel much the same at the pedal.
Fits
It is a direct replacement for the 2005-2008 Dodge Ram 1500 V6 3.7L, V8 4.7L or 5.7L, the 2004 Dodge Ram 2500 6-cylinder 5.9L, the 2004-2008 Ram 2500 V8 5.7L, the 2006-2008 Ram 2500 6-cylinder 5.9L, the 2007-2008 Ram 2500 6-cylinder 6.7L, the 2004-2008 Dodge Ram 3500 V8 5.7L or 6-cylinder 5.9L and the 2007-2008 Ram 3500 6-cylinder 6.7L. One assembly is needed per vehicle, and this listing is a single unit.
Specifications
- Quantity per vehicle: 1
- Reservoir: included
- Rubber components: EPDM
- Condition: New
- Country of origin: Mexico
In the box
One clutch master and slave cylinder assembly with its fluid line and reservoir.
Interchange: 136.67621
52110496AB · 52110496AC · CRS037 · PF9073
This part cross-references / interchanges with the following part numbers:
136.67621, 52110496AB, 52110496AC, CRS037, PF9073
Frequently Asked Questions
Does Dorman CC649038 fit the 2005-2008 Dodge Ram 1500 with the V8 4.7L?
Yes. Dorman CC649038 fits the 2005-2008 Dodge Ram 1500 with the V6 3.7L, V8 4.7L or V8 5.7L, and one assembly is needed per vehicle.
Does this Dorman clutch master and slave cylinder assembly come with the reservoir?
Yes. The reservoir is included, and the fluid line arrives pre-filled and pre-bled. The listing is a single assembly and nothing else.
What kind of rubber is in this clutch master and slave cylinder assembly?
The rubber components are EPDM, which is compatible with brake fluid.
Why would a clutch pedal sink or feel soft on a truck like this?
A pedal that sinks, feels soft or leaves the clutch dragging, along with fluid near the cylinders, can mean a failing master or slave cylinder. A shop can pressure-test the system to confirm.
Is 52110496AB a number that Dorman CC649038 replaces?
Yes. Dorman CC649038 replaces 52110496AB; the other cross-reference numbers are on the Interchange line.
