Dorman - First Stop Drum Brake Wheel Cylinder P/N:W610187
Service your rear drum brakes with this Dorman drum brake wheel cylinder, part number W370031 from the Dorman - First Stop line. It pushes the brake shoes against the drum when you press the pedal. It fits many vehicles, among them the 1995-1997 Ford Ranger, 1995-1997 Mazda B2300 and 1995-1997 Mazda B3000. It is cataloged for the rear position, left and right. See the Buyer's Guide tab for the full list and engine details.
Inside the drum, the wheel cylinder takes hydraulic pressure from the brake system and pushes the brake shoes outward against the drum. Dorman engineered this unit as a direct replacement, designed to match the original wheel cylinder in fit, function and performance on the listed applications. It is manufactured and tested for quality assurance.
Signs a wheel cylinder may need replacing include brake fluid seeping at the backing plate, fluid-soaked brake shoes, a soft or sinking pedal, or the vehicle pulling during braking. Diagnose the cause before replacing parts.
Interchange: 784-42016 · 784-85016 · 84-42016 · W-85016 · 134.65016 · 135.65016 · 375-54075
78442016 · 78485016 · 8442016 · W85016 · 13465016 · 13565016 · 37554075 · 18E1145 · 18E417 · W906758 · 34161 · WC14161 · F57Z2261A · ZZM126610 · WC370031 · F131518 · WC131518
This part cross-references / interchanges with the following part numbers:
Will this brake wheel cylinder fit a 1995-1997 Ford Ranger?
It is listed for the rear drum brakes of the 1995-1997 Ford Ranger, and also for the 1995-1997 Mazda B2300 and 1995-1997 Mazda B3000. Check the Buyer's Guide tab to confirm your exact vehicle.
What does a drum brake wheel cylinder do?
It turns hydraulic pressure from the brake system into force. That force pushes the brake shoes outward against the drum to slow the wheel.
What are the cups and boots made of?
Dorman makes the pressure cups and boots on this wheel cylinder from EPDM rubber.
What are signs a wheel cylinder may need replacing?
Common signs include brake fluid leaking at the backing plate, wet or contaminated shoes, a soft or sinking pedal, or pulling during braking. Other brake parts can cause similar symptoms, so diagnose the cause first.
Do I need to bleed the brakes after installing it?
Yes. Replacing a wheel cylinder opens the hydraulic system, so the brakes should be bled afterward. Follow the vehicle service information for the correct procedure.
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.