Dorman - First Stop Drum Brake Wheel Cylinder P/N:W610240
$27.99
(You save)
Restore firm hydraulic pressure to your rear drum brakes with the Dorman - First Stop Drum Brake Wheel Cylinder W610240. It drops in as a direct-fit replacement for the 2013-2020 Chevrolet Trax (All engines), where each vehicle uses two — one at each rear wheel. Dorman engineered it to match the original wheel cylinder's fit, function and performance on the listed application, and it is manufactured and tested for quality assurance.
Mounted on the drum brake, the wheel cylinder converts hydraulic line pressure into mechanical force, pushing its internal pistons and cups outward to press the brake shoes against the drum.
Aluminum body, 7/8 in bore: machined and surface-tested to provide an optimum sealing surface for the pressure cups.
EPDM rubber cups and boots: made with high-quality EPDM for long-lasting sealing.
Inverted flare connection: M10 x 1.0 inlet thread (10 mm, 1.0 pitch).
Bleeder screw included (bleeder screw cap not included).
Signs the original may need replacing include brake fluid leaking at the rear wheel, dampness on the shoes, or a low or spongy pedal — diagnose the cause before replacing. Country of origin: China.
Interchange: 101-2151 · 1012151 · 95910900 · Manufacturer part number W610240
This part cross-references / interchanges with the following part numbers:
101-2151, 95910900
Frequently Asked Questions
What vehicles does the W610240 wheel cylinder fit?
It is a direct-fit replacement for the 2013-2020 Chevrolet Trax (All engines). Each Trax uses two rear wheel cylinders. See the Buyer's Guide tab and confirm fitment for your vehicle.
What does a drum brake wheel cylinder do?
It converts hydraulic brake-line pressure into mechanical force, pushing its internal pistons and cups outward to press the brake shoes against the drum.
Is a bleeder screw included?
Yes, a bleeder screw is included. A bleeder screw cap is not included.
How do I know if my wheel cylinder needs replacing?
Signs may include brake fluid leaking at the rear wheel, dampness on the brake shoes, or a low or spongy pedal. Diagnose the cause before replacing, as other parts can cause these symptoms.
Should I replace both sides at once?
Best practice is to replace both rear wheel cylinders as a matched pair for balanced braking. This listing is for one; order two for a complete rear-axle service.
Write a Review
Dorman
Dorman - First Stop Drum Brake Wheel Cylinder P/N:W610240
Push the rear brake shoes firmly against the drum with the Dorman - First Stop Drum Brake Wheel Cylinder W10588. This hydraulic wheel cylinder mounts at the rear drum brakes and uses brake-fluid...
Keep the left-side drum brake on your classic Cadillac or Pontiac applying firm, even hydraulic pressure with the Dorman - First Stop Drum Brake Wheel Cylinder W13368. This wheel cylinder converts...
Bring firm, even drum braking back to your classic Mopar with the Dorman - First Stop Drum Brake Wheel Cylinder (W10581). This hydraulic wheel cylinder uses brake-fluid pressure to push its...
WARNING:
These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to
www.P65Warnings.ca.gov.
