Dorman - First Stop Drum Brake Wheel Cylinder P/N:W610244
$125.99
(You save)
Turn brake-line pressure into the piston force that spreads your rear brake shoes against the drum with the Dorman First Stop Drum Brake Wheel Cylinder W610244. It installs as a direct replacement on the 2014-2015 Mitsubishi Mirage [All] (this application uses 2 per vehicle) and is built to match the fit, function and performance of the original rear wheel cylinder, then tested for quality assurance.
EPDM rubber cups and boots: made with high-quality EPDM rubber for long-lasting sealing.
Surface-tested bore: the wheel cylinder bore is surface-tested to provide an optimum sealing surface for the pressure cups.
Key specs: 3/4 in inside diameter, 29.2 mm outside diameter, 54 mm length, and an M10 x 1.0 inlet thread on a zinc-casting body.
Bolted mount, bleeder included: two mounting holes with a bolted attachment and an included bleeder screw. The bleeder screw cap and mounting hardware are not included.
Signs this part may need replacing include fluid seepage at the cylinder, damp brake shoes, or a low, spongy pedal; diagnose the cause first, and if the wheel cylinder is at fault, replacing it while servicing the drum brakes is a fast, sure way to restore hydraulic operation. Consult the vehicle service information for the correct fasteners and whether they may be reused. Package contents: one wheel cylinder and one bleeder screw. Country of origin: China.
Interchange: 134.46504 · 13446504 · 375-72012 · 37572012 · 4610A020 · Manufacturer part number W610244.
This part cross-references / interchanges with the following part numbers:
134.46504, 375-72012, 4610A020
Frequently Asked Questions
What does this wheel cylinder do?
Mounted on the drum-brake backing plate, it converts hydraulic brake-line pressure into piston movement that pushes the rear brake shoes outward against the drum.
What vehicle does it fit?
It's a direct replacement for the 2014-2015 Mitsubishi Mirage [All], and that application uses 2 per vehicle. Check the Buyer's Guide tab to confirm your vehicle.
What's included in the package?
One wheel cylinder and one bleeder screw. The bleeder screw cap and mounting hardware are not included; consult the vehicle service information for the correct fasteners and whether they may be reused.
What are the key specifications?
3/4 in inside diameter, 29.2 mm outside diameter, 54 mm length, two mounting holes with a bolted attachment, and an M10 x 1.0 inlet thread. The body is zinc casting.
How do I know if my wheel cylinder needs replacing?
Signs may include fluid seepage at the cylinder, damp brake shoes, or a low, spongy pedal. Diagnose the cause before replacing, since other brake components can produce similar symptoms.
Write a Review
Dorman
Dorman - First Stop Drum Brake Wheel Cylinder P/N:W610244
Bring firm, even drum braking back to your classic Mopar with the Dorman - First Stop Drum Brake Wheel Cylinder (W10581). This hydraulic wheel cylinder uses brake-fluid pressure to push its...
Turn brake-fluid pressure into the force that expands your brake shoes with the Dorman First Stop Drum Brake Wheel Cylinder W15306 — the rear hydraulic actuator that pushes its cups and pistons...
Push the brake shoes firmly against the drum with the Dorman - First Stop Drum Brake Wheel Cylinder W14206. This front-left drum brake wheel cylinder receives pressurized brake fluid from the...
WARNING:
These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to
www.P65Warnings.ca.gov.
