Dorman 697-308 rear differential ring and pinion for the 1994-2010 Dodge Ram 1500 and other vehicles transfers driveshaft power to the rear axle. This Dorman differential ring and pinion directly replaces the original gears on the vehicles it fits.
- Dorman OE Solutions line
- Ring gear and pinion gear supplied together in one set
- 3.55 gear ratio
- Intended to address grinding and whining from failed original bearings
- Vehicle try-on testing and quality control checks
Quick facts
- Part: Dorman 697-308 differential ring and pinion
- Fits: the 1994-2010 Dodge Ram 1500 and other vehicles
- Position: Rear
- Condition: New
Grinding or whining from the rear axle can mean worn gears or failed bearings. Before you replace this differential ring and pinion, rule out other sources of rear-end noise, such as tires or wheel bearings, since a similar whine can come from them.
Fits
The vehicles it fits include the 1994-2010 Dodge Ram 1500, the 1994-2008 Dodge Ram 2500 and the 1997-2010 Dodge Dakota, and each takes one set. If your vehicle isn't one of these, look it up in the "Vehicles it fits" section.
Specifications
Fit and size
- Position: Rear
- Gear ratio: 3.55
- Quantity per vehicle: 1
Build and materials
- Type: ring gear and pinion gear set
- Item grade: Standard Replacement
- Condition: New
- Country of origin: India
In the box
One ring gear and one pinion gear. An installation kit is not included, so plan on new bolts and any other hardware the job needs.
Interchange: ZG C9.25-355 · YG C9.25-355
This part cross-references / interchanges with the following part numbers:
ZG C9.25-355, YG C9.25-355
Frequently Asked Questions
Is this rear differential ring and pinion right for the 1994-2008 Dodge Ram 2500?
Yes. Dorman 697-308 is a rear differential ring and pinion that fits the 1994-2008 Dodge Ram 2500, and that truck takes one set.
Does the Dorman 697-308 set include an installation kit?
No. The set contains one ring gear and one pinion gear, and an installation kit is not included.
What gear ratio does the Dorman 697-308 differential ring and pinion have?
The gear ratio is 3.55. Dorman 697-308 is a Standard Replacement grade rear set.
What noises can a worn rear differential ring and pinion make?
Grinding or whining from the rear axle can come from worn gears or failed bearings, though other parts can make a similar noise. A shop can inspect the differential.
Is ZG C9.25-355 the same as this differential ring and pinion?
Yes. ZG C9.25-355 is an interchange number for Dorman 697-308, and YG C9.25-355 is another.
