Skip the hydraulic press and swap a worn front bearing in one bolt-on step with the Dorman - OE Solutions Loaded Steering Knuckle Kit / Wheel Bearing and Hub Assembly (MPN 686-435). This front left loaded knuckle drops in as a direct-fit replacement for the 2018-2024 Honda Odyssey (see the Buyer's Guide tab for engine details), arriving with the critical components already pressed together so you install one assembled unit instead of chasing individual parts.
Pre-pressed assembly: the complete loaded knuckle ships with its components assembled and ready to bolt in right out of the box.
No press required: designed to eliminate the traditional hydraulic-press procedure, making a full bearing repair faster and more predictable for pros and DIYers alike.
Saves shop time: intended to avoid the extended time spent wrestling with corroded, seized individual components.
Quality engineering: designed in the United States and backed by a century of automotive aftermarket experience.
Signs the original may need replacing include a humming or grinding wheel bearing, play at the hub, or a knuckle damaged by wear. If a failed front left bearing or knuckle is the cause, this assembly replaces it.
Interchange: 51216THRA01
This part cross-references / interchanges with the following part numbers:
51216THRA01
Frequently Asked Questions
What vehicle does this fit?
It is a direct-fit front left loaded knuckle for the 2018-2024 Honda Odyssey. Check the Buyer's Guide tab to confirm the application for your specific vehicle.
What position is this assembly?
This is the front left (driver-side) loaded steering knuckle with the wheel bearing and hub already assembled.
Do I need a hydraulic press to install it?
No. The bearing and hub come pre-pressed into the knuckle, so it is designed to bolt in as a complete unit without a press.
What interchange number does it replace?
It cross-references 51216THRA01. Match the number and confirm fitment before ordering.
What are signs my knuckle or bearing needs replacing?
Common signs include a humming or grinding noise from the wheel bearing, looseness or play at the hub, or a damaged knuckle. Diagnose the cause before replacing.
Restore a solid, precise steering-and-hub connection at the front left corner with the Dorman - OE Solutions Steering Knuckle Kit, Wheel Bearing and Hub Assembly (MPN 686-433). It installs as a...
Replace a worn front right wheel bearing and hub without wrestling a hydraulic press using the Dorman - OE Solutions Loaded Knuckle (Steering Knuckle Kit with Wheel Bearing and Hub Assembly) 686-422...
Skip the hydraulic press and tackle a worn wheel bearing with the Dorman OE Solutions Steering Knuckle Kit, Wheel Bearing and Hub Assembly 686-262. This front right loaded knuckle is a direct-fit...
Tackle a worn Honda Civic wheel bearing without a hydraulic press using the Dorman - OE Solutions Steering Knuckle Kit / Wheel Bearing and Hub Assembly 686-357. This front left loaded knuckle is a...
Skip the hydraulic press on your next bearing job with this Dorman wheel hub and steering knuckle kit, part number 686-366. This front right loaded knuckle, listed as both a Wheel Bearing and Hub...
WARNING:
These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to
www.P65Warnings.ca.gov.
