Front Right Outer Tie Rod End for 2007-2017 Jeep Wrangler & More - Dorman TO96022RD

Be the first to review this product
$275.99
MPN: TO96022RD
UPC: 889245590886
Item Package Quantity: 1
Adding to cart… The item has been added

Have questions?

Dorman - OE Solutions Steering Tie Rod End P/N:TO96022RD
Dorman - OE Solutions Steering Tie Rod End P/N:TO96022RD
$275.99

Dorman TO96022RD front right outer tie rod end for the 2007-2017 Jeep Wrangler and other vehicles carries steering input out to the wheel. It comes from Dorman's RD line, which is built for severe-duty service.

  • RD stands for rugged duty: made for off-road work, heavy hauling, towing and other grueling conditions
  • Housing of quenched and tempered steel with a protective coating
  • Upgraded direct replacement, designed for improved durability and the fit of the OE design in severe-duty applications
  • Castle nut, cotter pin and grease fitting included, with a corrosion-resistant coating on the hardware
  • Pre-greased joint in a polychloroprene dust boot, with molded-in standoffs where applicable to keep the grease in place

Loose or wandering steering, a clunk from the front end or uneven tire wear can mean a worn steering tie rod end. Other steering and suspension parts show similar symptoms, so find the source of the problem first. With the engine off, look at the dust boot for tears or leaking grease.

This is a direct-fit tie rod for the 2007-2017 Jeep Wrangler and the 2018 Jeep Wrangler JK.

Specifications

Fit and size

  • Position: front right outer
  • Quantity per vehicle: 1
  • Length: 186.5 mm
  • Outside diameter: 35 mm (tube diameter 35 mm)
  • Cone outside diameter: 20.8 mm
  • End 1: male, 14 mm thread, 1.5 mm pitch
  • End 2: female, 30 mm thread, 1.5 mm pitch
  • Thread direction: clockwise (right) on both ends
  • Stud type: taper
  • Adjustable: yes

Build and materials

  • Housing material: steel
  • Finish: coated
  • Dust boot material: polychloroprene
  • Ball joint: included
  • Pre-greased: yes
  • Head drive type: slotted
  • Country of origin: Thailand

In the box

One tie rod end, one castle nut, one cotter pin and one Zerk fitting. This listing holds one; the Wrangler takes one on this side, and the left side needs its own tie rod end, so order that one too if you are doing both sides.

Interchange: 52060052AG · DS300043 · DS800982A · TXMS25615

This part cross-references / interchanges with the following part numbers:

52060052AG, DS300043, DS800982A, TXMS25615

Frequently Asked Questions

Do these tie rod ends fit a 2014 Jeep Wrangler?

Yes. Dorman TO96022RD is the front right outer tie rod end for the 2007-2017 Jeep Wrangler, which includes the 2014 model year.

Is Dorman TO96022RD a tie rod end replacement for the 2018 Jeep Wrangler JK?

Yes. Dorman TO96022RD fits the 2018 Jeep Wrangler JK in the front right outer position. The left side uses a separate tie rod end.

What comes with the Dorman RD tie rod end?

The box holds one tie rod end, one castle nut, one cotter pin and one Zerk fitting. The dust boot and ball joint are part of the tie rod end.

What thread sizes does this RD tie rod end use?

On Dorman TO96022RD the male end has a 14 mm thread and the female end a 30 mm thread, both at 1.5 mm pitch and right-hand (clockwise). The stud is a taper type.

What does RD mean on this Dorman tie rod end?

RD stands for rugged duty, Dorman's line for off-road work, heavy hauling, towing and other grueling conditions. This one has a quenched and tempered steel housing with a protective coating.