Dorman - OE Solutions Suspension Control Arm and Ball Joint Assembly P/N:520-520
Help bring back a smooth, steady front end with the Dorman 520-511 front left lower Nissan Altima control arm, a direct replacement for the original assembly on the 2002-2006 Nissan Altima, 2004-2008 Nissan Maxima and 2009-2014 Renault Safrane. See the Buyer's Guide tab for engine details.
This Dorman suspension control arm and ball joint assembly connects the steering knuckle to the chassis. It lets the wheel travel up and down while holding it in position, and its ball joint provides the pivot the wheel needs to steer.
Signs this part may need replacing include clunking over bumps, loose or wandering steering, uneven tire wear, or a worn ball joint or cracked bushings found during an inspection. It is sold individually for the front left lower position, and we recommend replacing both sides together for balanced handling. A wheel alignment is typically recommended after installation, so follow the vehicle service information.
Interchange: 102-5286 · 810-96275B · 623.42015 · 54501-7Y000
1025286 · 81096275B · 62342015 · 545017Y000 · TC2928 · CA10390 · 9CB30027 · RK620167 · FA4283 · GS20456 · CMS20456 · 2605410 · 545017Y00A · 545018J000 · SK498202 · SK620167 · JTC1546
This part cross-references / interchanges with the following part numbers:
Is this a lower control arm for the 2002-2006 Nissan Altima?
Yes. It is the front left lower arm for the 2002-2006 Nissan Altima. Check the Buyer's Guide tab for engine details.
Does it also work as a control arm for the 2004-2008 Nissan Maxima?
Yes. It fits the 2004-2008 Nissan Maxima in the front left lower position, and it also fits the 2009-2014 Renault Safrane.
Does the Dorman control arm come with the ball joint installed?
Yes. The ball joint and bushings arrive pre-installed, so the assembly goes in as one piece and saves time and labor.
What does a lower control arm do?
It links the steering knuckle to the chassis and lets the wheel move up and down while holding it in place. The ball joint provides the pivot for steering.
What are signs the control arm may need replacing?
Signs include clunking over bumps, wandering steering, uneven tire wear, or a loose ball joint or cracked bushings found during inspection. Diagnose the cause before replacing the arm.
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.