Dorman 520-887 front left lower control arm with ball joint for the 2001 Dodge Stratus and other vehicles links the front left wheel to the chassis. This Dorman OE Solutions control arm and ball joint assembly directly replaces the original equipment on specific vehicles.
- Dorman OE Solutions product line
- Ball joint and bushings come pre-installed, saving time and labor
- Steel control arm with rubber bushings
- Additional coatings for rust and corrosion resistance
- Pinch-type ball joint stud with a 14 mm thread diameter
- Tested to support a smooth ride, directional stability and predictable dynamics
Quick facts
- Part: Dorman 520-887 control arm with ball joint
- Also called: control arm and ball joint assembly
- Fits: 2001 Dodge Stratus and other vehicles
- Position: Front left lower
- Material: Steel control arm, rubber bushings
- Condition: New
A worn Dorman lower control arm can show up as a clunk over bumps, loose steering or uneven tire wear. Several suspension parts can produce those signs, so with the engine off, look at the bushings for cracks or tearing and the ball joint boot for splits before you replace anything; a shop can check play in the joint.
Fits
The 2001 Dodge Stratus, the 2001 Chrysler Sebring and the 2000-2001 Mitsubishi Eclipse are among the vehicles this arm fits. Both front arms are normally replaced together, but this listing is one arm for the front left; the front left side of the 2001 Dodge Stratus takes one, and the front right is ordered separately.
Specifications
Fit and size
- Position: front left lower
- Quantity per vehicle: 1 (this side)
- Mounting hole diameter: 12.3 mm
- Ball joint thread diameter: 14 mm
- Maximum width: 288.5 mm
- Maximum length: 237 mm
Build and materials
- Control arm type: casting/forged
- Control arm material: steel
- Bushing material: rubber
- Ball joint stud type: pinch
- Grade: standard replacement
- Condition: new
- Country of origin: Taiwan
In the box
One control arm with ball joint. Mounting hardware is included.
Installation notes
- The ball joint arrives pre-greased.
- A grease fitting is not included.
Interchange: 102-6728
TC6266 · CA14252 · RK620312 · FA3032 · GK80109 · GS80109 · CMS80109 · MR369789 · MR455737 · 2606031 · 5CB25072 · SRK620312 · JTC2468
This part cross-references / interchanges with the following part numbers:
102-6728, TC6266, CA14252, RK620312, FA3032, GK80109, GS80109, CMS80109, MR369789, MR455737, 2606031, 5CB25072, SRK620312, JTC2468
Frequently Asked Questions
Is this Dodge Stratus control arm right for the 2001 model?
Yes, Dorman 520-887 is the front left lower control arm with ball joint for the 2001 Dodge Stratus; if your car isn't named here, find it in the "Vehicles it fits" section.
Does this assembly include Dorman control arm bushings?
Yes. Dorman 520-887 comes with the ball joint and rubber bushings pre-installed on the steel arm, and mounting hardware is included.
What size is the ball joint thread on this Dorman control arm?
The ball joint thread diameter is 14 mm, on a pinch-type stud. The mounting hole is 12.3 mm across.
Is the ball joint on this assembly pre-greased?
Yes, the ball joint arrives pre-greased. A grease fitting is not included with this arm.
Does Dorman 520-887 replace part number 102-6728?
Yes. 102-6728 is one of the numbers this assembly replaces; the rest are on the Interchange line at the bottom of the page.
