Dorman 521-367 front left lower control arm with ball joint for the 2007-2008 Honda Fit links the wheel to the chassis and lets the suspension move. The same part is also called a control arm and ball joint assembly.
- Part of the Dorman OE Solutions line
- Tested for a smooth ride, directional stability and predictable dynamics
- Ball joint and bushings come pre-installed, which saves time and labor
- Stamped steel arm with rubber bushings
- Threaded ball joint stud with a 14 mm thread diameter
- Additional coatings resist rust and corrosion
Quick facts
- Part: Dorman 521-367 control arm with ball joint
- Also called: control arm and ball joint assembly
- Fits: 2007-2008 Honda Fit
- Position: Front left lower
- Material: Steel
- Condition: New
Worn bushings or a worn ball joint can show as a clunk over bumps, uneven front tire wear or loose steering. Before replacing, look with the engine off for cracked bushings or a split ball joint boot; a shop can test joint play. This listing is one arm for the front left, which takes one. The front right is a separate part, and both sides are normally replaced together.
Fits
This control arm is a direct replacement for the original equipment on the 2007-2008 Honda Fit.
Specifications
Fit and size
- Position: Front left lower
- Quantity per vehicle: 1 (front left)
- Mounting hole diameter: 12.2 mm
- Ball joint thread diameter: 14 mm
- Maximum width: 288.5 mm
- Maximum length: 237 mm
Build and materials
- Type: Stamped control arm with ball joint installed
- Control arm material: Steel
- Bushing material: Rubber
- Ball joint stud type: Threaded
- Grade: Standard replacement
- Condition: New
- Country of origin: Taiwan
In the box
One control arm and mounting hardware.
Installation notes
- The ball joint is pre-greased.
- No grease fitting is included.
Interchange: 102-8151 · 623.40018
TC6093 · CA16213 · 51360SLNA01 · 51360SLNA02 · 5CB60084 · RK620502 · GS60107 · CMS60107 · 2606901 · 1509011
This part cross-references / interchanges with the following part numbers:
102-8151, 623.40018, TC6093, CA16213, 51360SLNA01, 51360SLNA02, 5CB60084, RK620502, GS60107, CMS60107, 2606901, 1509011
Frequently Asked Questions
Is the Dorman 521-367 control arm the right one for a 2007-2008 Honda Fit?
Yes. Dorman 521-367 is the front left lower control arm with ball joint for the 2007-2008 Honda Fit. The front right side is a separate part.
Does this control arm come with the ball joint and bushings already installed?
Yes. Dorman 521-367 arrives with the ball joint and rubber bushings pre-installed, and mounting hardware is included.
What thread size is the ball joint stud on this control arm?
The ball joint stud is threaded, with a 14 mm thread diameter. The mounting hole diameter is 12.2 mm.
How can I tell if a front lower control arm bushing or ball joint is worn?
Cracked or torn rubber bushings and a split ball joint boot are visible signs. A clunk over bumps or uneven front tire wear can also mean wear.
Is Dorman 521-367 an interchange for 51360SLNA01?
Yes. 51360SLNA01 is one of the numbers that Dorman 521-367 replaces.
