Dorman 541-101 front suspension kit for the 2004-2012 Chevrolet Malibu and other vehicles replaces the left and right side suspension components in one box. This Dorman suspension kit is application-specific and engineered for factory-like feel and performance.
- Left and right side components in one kit, for both sides of the front suspension
- Extended-life components with low-friction polymer bearings
- Synthetic grease for long service life
- Tested on the vehicle for fit, and for corrosion and materials
- Part of the Dorman OE Solutions line
Quick facts
- Part: Dorman 541-101 suspension kit
- Fits: 2004-2012 Chevrolet Malibu and other vehicles
- Position: Front
- Condition: New
Worn front-end parts can show up as loose or wandering steering, a clunk over bumps or uneven tire wear. Before you replace the kit, rule out worn tires, wheel bearings and struts, since those can produce similar noises and handling changes.
Fits
It works as a suspension kit for the 2005-2010 Pontiac G6 and the 2007-2009 Saturn Aura as well. Since the kit holds both the left and right sides, one kit covers a car's front end.
Specifications
Fit and size
- Position: front
- Quantity per vehicle: 1 kit
- Bushing inside diameter: 12.32 mm
- Bushing outside diameter: 49.8 mm
Build and materials
- Grade: standard replacement
- Bushing material: steel and rubber
- Bushings: included
- Condition: new
- Country of origin: Turkey
In the box
Two upper control arms, two outer tie rod ends, two inner tie rod ends and two stabilizer bar kits. Coil springs, shocks, strut mount insulators and link bolts are not included, so plan on new link bolts.
Frequently Asked Questions
Is this a Chevy Malibu suspension kit for the 2004-2012 model years?
Yes. Dorman 541-101 is a front suspension kit for the 2004-2012 Chevrolet Malibu.
Are link bolts included with this front suspension kit?
No. The kit has two upper control arms, two inner and two outer tie rod ends and two stabilizer bar kits. Link bolts, coil springs, shocks and strut mount insulators are not included.
What bushing material and sizes does this kit use?
Dorman 541-101 bushings are steel and rubber, with a 12.32 mm inside diameter and a 49.8 mm outside diameter.
Do the components in this kit use low-friction bearings?
Yes. Dorman 541-101 uses extended-life components with low-friction polymer bearings and synthetic grease. The part has been tested on the vehicle for fit, and for corrosion and materials.
How can I tell if front control arm bushings are worn?
A clunk over bumps, loose steering or uneven tire wear can be signs of worn bushings or other worn front-end joints. A shop can inspect the bushings and joints for cracked rubber and play.
