Nut - Dorman 982-006D

Dorman 982-006D nut is a serrated flange hex nut that threads onto an M6-1.0 bolt or stud to hold parts together. The washer is attached, so each Dorman nut goes on as a single piece.

• Class 10.9 steel nut, heat hardened for strength
• Serrated flange with an attached washer on a hex nut
• Yellow zinc finish, with salt spray testing to confirm corrosion resistance
• Made to specific thread tolerance standards on an M6-1.0 coarse thread
• Used in a variety of applications, from auto to home

Quick facts

• Part: Dorman 982-006D nut
• Material: Steel
• Condition: New

A nut with stripped or rounded threads, a rounded hex or heavy rust can stop holding a part tight, and a loose part may rattle or shift. Before you replace it, look over the old nut and the bolt or stud it sits on with the engine off and cool. If the stud's threads are damaged, a new nut alone may not solve the problem.

Fits

This is universal hardware, sold by its size and thread rather than by application. Match the thread size, thread type and height to the nut you are replacing.

Specifications

In the box

Four nuts. This listing holds the whole pack of four.

Interchange: 5045

Product information is for general reference and may contain errors. See our Disclaimer.