Dorman 982-012D nut is an M12-1.25 hex nut that threads onto a matching bolt or stud to clamp parts together. Use this Dorman nut wherever a Class 10.9 nut of this thread is called for.
- Steel nut made to specific thread tolerance standards
- Salt spray testing to check corrosion resistance
- Yellow zinc finish over a heat-hardened Class 10.9 nut
- Hex nut for uses ranging from auto repair to home projects
- Fine metric thread, M12-1.25, with a right-hand (clockwise) direction
Quick facts
- Part: Dorman 982-012D nut
- Material: Steel
- Condition: New
A nut with stripped or rounded threads, a rounded hex or heavy rust may stop holding a joint tight, though a joint that keeps loosening can have other causes. Before you replace the nut, rule out a damaged bolt or stud thread, because a new nut will not grip a stripped one.
Fits
This is universal hardware, chosen by its size and thread. Match the M12-1.25 thread and the 0.39 in height to the nut you are replacing. This listing is a pack of four nuts, so count how many places need this size.
Specifications
Fit and size
- Thread size: M12-1.25
- Thread pitch: 1.25 mm
- Thread type: Fine
- Thread direction: Clockwise (right)
- Inside diameter: 12 mm
- Height: 0.39 in
- Pieces in pack: 4
Build and materials
- Material: Steel
- Finish: Yellow zinc
- Grade: Class 10.9, heat hardened
- Locking: No
- Condition: New
- Country of origin: India
In the box
Four nuts. No washer is attached.
Interchange: 009-030
440720
Product information is for general reference and may contain errors. See our Disclaimer.
Frequently Asked Questions
Will the Dorman 982-012D nut fit my bolt?
Yes, if your bolt or stud is M12-1.25. Match the thread size and the 0.39 in height to your old nut; the Dorman 982-012D has a right-hand fine thread.
How many nuts come in this M12-1.25 pack?
The pack holds four nuts. No washer is attached to them.
Is this M12-1.25 nut a coarse or fine thread?
This nut has a fine thread. The Dorman 982-012D is M12-1.25 with a 1.25 mm pitch and a right-hand (clockwise) direction.
Is this Class 10.9 nut a locking nut?
No, this nut is not a locking nut. It is heat hardened and Class 10.9, with a yellow zinc finish.
Has this steel hex nut been corrosion tested?
Yes. The hardware goes through salt spray testing to check corrosion resistance, and the steel nut has a yellow zinc finish.
