Raybestos Brakes Disc Brake Caliper P/N:FRC11625
Squeeze the brake pads against the rotor with the Raybestos R-Line Remanufactured Semi-Loaded Disc Brake Caliper and Bracket Assembly (FRC11620) — a floating, single-piston front caliper that drops in as a direct-fit replacement for the 2004-2012 Chevrolet Malibu, 2005-2010 Pontiac G6, 2006-2009 Pontiac Solstice, 2007-2009 Saturn Aura, and 2009-2010 Saturn Sky (see the Buyer's Guide tab for engine-specific coverage, including V6-3.5L, V6-3.6L, and V6-3.9L applications).
Signs a caliper may need replacing include fluid leaks at the piston or bleeder, a sticking or dragging brake, and uneven pad wear. If a failed caliper is the cause, this assembly replaces it.
The assembly has a coated caliper and bracket finish, a cast-iron casting, a 2.370 in (60.198 mm) piston, and an M10X1.00 bleeder screw. It is friction-ready: the mounting bracket is included, but brake pads are not. Sold individually; replace both sides together as a matched pair for balanced braking. Country of origin: Mexico.
Interchange: 99-17351B · 9917351B · 16-4911A · 164911A · 18-B4911A · 18B4911A · 141.62141 · SC1166-1 · SC11661 · 22705314 · 14-4209 · 144209. Manufacturer part number FRC11620.
This part cross-references / interchanges with the following part numbers:
Will this caliper fit my vehicle?
It's a direct-fit front caliper for the 2004-2012 Chevrolet Malibu, 2005-2010 Pontiac G6, 2006-2009 Pontiac Solstice, 2007-2009 Saturn Aura, and 2009-2010 Saturn Sky. See the Buyer's Guide tab for engine coverage.
What position is this caliper for?
The catalog lists it for the front position in both left and right locations. It's sold individually, so order the side you need and replace both sides together as a matched pair for balanced braking.
Are brake pads included?
No. It's a friction-ready (semi-loaded) assembly, so the mounting bracket is included but brake pads are not. Reuse or replace pads as directed by the vehicle service procedure.
Is this a new or remanufactured caliper?
It's a remanufactured OE caliper. New seals, boots, bleeder screws, abutment hardware, banjo bolts, and O-rings are installed, and every unit is 100% pressure tested.
What are the caliper's specifications?
It's a floating, single-piston caliper with a 2.370 in (60.198 mm) piston and a cast-iron casting. The bleeder screw thread is M10X1.00.
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.