Bring the rear right disc brake back to service with the Raybestos R-Line Remanufactured Semi-Loaded Disc Brake Caliper and Bracket Assembly (MPN FRC11036). This floating caliper mounts at the rear right corner of the 2000-2002 Cadillac DeVille, 2003-2005 Chevrolet Astro, 1999-2002 Chevrolet Silverado 1500, 2000-2001 Chevrolet Tahoe, 2003-2005 GMC Safari, 1999-2002 GMC Sierra 1500, and 2000-2001 GMC Yukon (all engines). It hydraulically clamps the brake pads against the rotor to slow the wheel.
- Remanufactured from OE cores: castings, guide pins, and brackets are inspected and reused, while seals, boots, bleeder screws, abutment hardware, banjo bolts, and O-rings are replaced with new materials for leak-free operation.
- EPDM70 rubber components: chosen for heat resistance, performance, and durability; silicone boots are fitted on heavy-duty applications where applicable.
- 100% pressure tested: every unit is pressure tested, with materials matching OE specifications and vehicle-specific designs.
- Build details: aluminum casting with a 2.126 in (54 mm) piston and an M10x1 bleeder screw thread.
If a seized, leaking, or corroded caliper is causing your rear right braking issue, this assembly replaces it. Sold individually; for even, balanced braking, service both sides as a matched pair. Made in Mexico.
Interchange: 18-B4727 · 18B4727 · 99-17305B · 9917305B · 18-P4727 · 18P4727 · 141.66503 · 14166503 · 142.66503 · 14266503 · SC0198 · 10-4375S · 104375S · Manufacturer part number FRC11036
This part cross-references / interchanges with the following part numbers:
Frequently Asked Questions
Does this caliper fit my vehicle?
Cataloged for the rear right position on the 2000-2002 DeVille, 2003-2005 Astro/Safari, 1999-2002 Silverado 1500/Sierra 1500, and 2000-2001 Tahoe/Yukon (all engines). See the Buyer's Guide.
Is a mounting bracket included?
Yes. This is a semi-loaded caliper and bracket assembly, so the bracket is included; new abutment hardware, seals, boots, bleeder screws, banjo bolts, and O-rings are also installed.
What does remanufactured mean here?
The casting, guide pins, and bracket are inspected OE cores that are reused, while all rubber and sealing components are replaced with new materials, and each unit is 100% pressure tested.
What piston and bleeder specs does it have?
It is a floating caliper with a 2.126 in (54 mm) piston diameter and an M10x1 bleeder screw thread.
How do I know my caliper needs replacing?
Signs a caliper may need replacing include fluid leaks, a sticking or seized piston, uneven pad wear, or a pull to one side. Diagnose the cause before replacing.
Write a Review