Gates 2/9640PB accessory drive belt for the 1997-1999 Kenworth T2000 6-cylinder 14.6L and other vehicles links two V-belt strands into one belt that carries engine power to belt-driven accessories. It is made for heavy-duty, high-vibration drives that need belt sets, with a secure strand fitting each pulley groove.
- Green Stripe PowerBand: two V-belt strands joined by a permanent, high-strength tie band that works as one unit
- Polyester tensile cords for extra strength, added flexibility and shock-load resistance
- Molded notches reduce bending stress on small diameter pulleys while dissipating heat
- Even load distribution between strands for shock-load absorption
- Joined strands eliminate belt turnover and belts jumping off the drive
- Meets or exceeds SAE J636 specifications and meets RMA oil and heat resistant standards and static conductivity requirements
Quick facts
- Part: Gates 2/9640PB accessory drive belt
- Fits: the 1997-1999 Kenworth T2000 6-cylinder 14.6L and other vehicles
- Position: alternator and air conditioning; fan and alternator; fan and power steering; fan
- Material: EPDM belt, polyester cord
- Condition: New
Cracks across the notches, fraying or a squeal from the drive can mean the belt is worn. Before you replace it, rule out a worn or misaligned pulley or an accessory that drags on the drive, since those can wear out a new belt too. This listing is one belt.
Fits
The 1997-1999 Kenworth T2000 6-cylinder 14.6L, the 1989-1991 Mack DMM 6-cylinder 11.0L and the 1992-1995 DMM 6-cylinder 11.9L take this belt, and so do many other vehicles from Mack, Chevrolet, GMC, Freightliner, International and Peterbilt. The quantity is one belt per vehicle.
Specifications
Fit and size
- Position: alternator and air conditioning; fan and alternator; fan and power steering; fan
- Quantity per vehicle: 1
- Cross section: HC50
- Strands: 2
- Top width: 28 mm (1.135 in)
- Top width per strand: 13 mm (0.5 in)
- Outside circumference: 1635 mm (64.96 in)
- Effective length: 1625 mm (63.99 in)
Build and materials
- Type: high capacity joined V-belt
- Construction: notched
- Belt material: EPDM
- Cord material: polyester
- Condition: new
- Country of origin: United States
Interchange: 25-16255-2 · 25-9640-2
2T17640 · GT2PB17642 · 2B17640 · 88GB445P645
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
2T17640, GT2PB17642, 2B17640, 88GB445P645, 25-16255-2, 25-9640-2
Frequently Asked Questions
Is this Gates accessory drive belt right for the 1997-1999 Kenworth T2000 6-cylinder 14.6L?
Yes. Gates 2/9640PB fits the 1997-1999 Kenworth T2000 6-cylinder 14.6L and many other vehicles; look up your own vehicle in the "Vehicles it fits" section.
What are the dimensions of the Gates 2/9640PB belt?
Gates 2/9640PB has an HC50 cross section, a 28 mm top width, a 1635 mm outside circumference and a 1625 mm effective length. It has two strands, each 13 mm wide on top.
Is the 2/9640PB one belt or a set of belts?
This listing is one joined belt. Gates 2/9640PB ties two V-belt strands together with a permanent tie band, and the application takes one belt.
What does a worn Green Stripe PowerBand belt look like?
With the engine off and cool, look for cracks across the notches or fraying along the strands. A squeal from the drive can also mean the belt is worn.
Does the Gates 2/9640PB meet SAE J636?
Yes. Gates 2/9640PB meets or exceeds SAE J636 specifications. It also meets RMA oil and heat resistant standards and static conductivity requirements.
