Gates 26R4057 CVT belt for the 2024-2026 Polaris Ranger Crew 1000 and other vehicles transfers engine power between the two clutches of a continuously variable transmission.
- G-Force RedLine design with less speed ratio and energy loss in extreme off-road use
- Crack- and wear-resistant construction for the most demanding applications
- Heat resistance and recovery under severe duty cycles
- Patented EE compound that maximizes axial stiffness, so the belt runs at higher continuous torques or loads
- Tested under extreme conditions in controlled environments and on race vehicles
Quick facts
- Part: Gates 26R4057 CVT belt
- Also called: cvt transmission belt
- Fits: 2024-2026 Polaris Ranger Crew 1000 and other vehicles
- Position: Drive belt
- Material: EPDM belt with aramid cord
- Condition: New
A cvt transmission belt that is cracked, frayed or glazed, or a machine that slips and accelerates sluggishly, may be due for a new belt. Those signs alone don't prove the belt is at fault, since a worn clutch component might be behind the slipping instead. A vehicle takes one belt, and this listing is one belt.
Fits
The fit includes the 2024-2026 Polaris Ranger Crew 1000, the 2022-2026 Polaris Pro XD Full-Size Gas and the 2022-2026 Polaris Pro XD Full-Size Gas Crew, along with many other Polaris Ranger and Pro XD models. If your model isn't named here, look up its year and trim in the "Vehicles it fits" section.
Specifications
Fit and size
- Position: Drive belt
- Quantity per vehicle: 1
- Cross section designation: RVS-R
- Top width: 32 mm (1.26 in)
- Outside circumference: 1060 mm (41.743 in)
- Pitch length: 1030.5 mm (40.57 in)
- Pitch width: 30.1 mm (1.183 in)
- Thickness: 15.9 mm (0.627 in)
Build and materials
- Type: Power sport specialty high performance CVT belt
- Construction: Double notched
- Belt material: EPDM
- Cord material: Aramid
- Grade: OE Improved
- Condition: New
- Country of origin: United States
Interchange: DBP01218EX · DBWH1218 · MMP01218 · 26C4057 · 3211218 · UA493 · UXP493
This part cross-references / interchanges with the following part numbers:
DBP01218EX, DBWH1218, MMP01218, 26C4057, 26R4057, 3211218, UA493, UXP493
Frequently Asked Questions
Is the Gates 26R4057 CVT belt right for a 2024-2026 Polaris Ranger Crew 1000?
Yes. Gates 26R4057 fits the 2024-2026 Polaris Ranger Crew 1000. For other Polaris models, look up your year and trim in the "Vehicles it fits" section.
What size is the Gates 26R4057 belt?
Gates 26R4057 has a top width of 32 mm (1.26 in), an outside circumference of 1060 mm (41.743 in) and a thickness of 15.9 mm (0.627 in). Its pitch length is 1030.5 mm (40.57 in).
What is this CVT belt made of?
This CVT belt has an EPDM body with an aramid cord and a double-notched construction.
How can I spot a worn CVT belt?
Cracks, fraying or glazing seen with the engine off and cool, plus slipping or sluggish acceleration while driving, can be signs of wear.
Was the Gates G-Force RedLine belt tested on race vehicles?
Yes. Testing took place in controlled environments under extreme conditions and also on race vehicles.
