Gates 30G3636 CVT belt for the 2006 John Deere Buck 650 Auto and other vehicles transfers engine power between the CVT clutches. Its improved crack and wear resistance gives up to 2x the life of the original G-Force belt.
- G-Force WorkHorse belt for tough tasks and trails, optimized for engines under 800cc
- Proprietary Ethylene Elastomer (EE) compound for axial stiffness and heat tolerance, with less heat fade and less speed loss
- High tensile aramid cord for acceleration, shock load resistance and extreme fatigue resistance when hauling heavy loads over aggressive terrain
- Double-notched construction
Quick facts
- Part: Gates 30G3636 CVT belt
- Also called: cvt transmission belt
- Fits: 2006 John Deere Buck 650 Auto and other vehicles
- Position: Drive belt
- Material: Ethylene Elastomer belt with Aramid cord
- Condition: New
A worn belt can slip under load, lose top speed or show cracks and worn notches. Those signs alone don't prove the belt is the problem, since a worn clutch can dull acceleration too.
Fits
Besides the 2006 John Deere Buck 650 Auto, this belt fits the 2006 John Deere Buck 650 EX Auto and the 2006 John Deere Buck 650 EXT Auto, with one belt per application. If your machine is not among these, look it up by make, model and year in the "Vehicles it fits" section. It is not for turbocharged or heavily modified engines.
Specifications
Fit and size
- Position: Drive belt
- Quantity per vehicle: 1
- Cross section designation: RVS-R
- Top width: 33 mm (1.281 in)
- Outside circumference: 953 mm (37.5 in)
Build and materials
- Construction: Double notched
- Belt material: Ethylene Elastomer
- Cord material: Aramid
- Condition: New
- Country of origin: United States
Interchange: 420280200 · 711280200 · 715900023 · XTX2274 · 33GBS951 · C420280200 · C715900023 · 30C3636 · UA420
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
420280200, 711280200, 715900023, 30G3636, XTX2274, 33GBS951, C420280200, C715900023, 30C3636, UA420
Frequently Asked Questions
Does the Gates 30G3636 CVT belt fit the 2006 John Deere Buck 650 EX Auto?
Yes. Gates 30G3636 fits the 2006 John Deere Buck 650 EX Auto, and that machine takes one belt.
What size is the Gates 30G3636 belt?
Gates 30G3636 is 33 mm (1.281 in) wide across the top and 953 mm (37.5 in) in outside circumference, with a double-notched build.
What is this G-Force WorkHorse belt made of?
The belt is Ethylene Elastomer with an aramid cord. The high tensile cord is meant for shock loads and heavy hauling over rough terrain.
Can this cvt transmission belt go on a turbocharged or heavily modified engine?
No. This belt is not for turbocharged or heavily modified engines, and it is optimized for engines under 800cc.
How can I tell if this double-notched CVT belt is worn?
With the engine off and cool, look for cracks or worn notches along the belt. Slipping or lost speed in normal driving can also mean it is worn.
