Gates 44019 water pump for the 1991-1996 Ford F800 truck and other vehicles circulates coolant through the engine to carry heat away, and on that truck it fits the V8 7.0L. This listing is one new engine water pump, made to match the original pump's specifications.
- Every pump gets a full functional test of its seals and bearings
- Both the casting and the finished pump are leak tested
- Cast iron housing with a stamped steel impeller
- Three outlets and accessory belt drive
Quick facts
- Part: Gates 44019 water pump
- Also called: engine water pump
- Fits: 1991-1996 Ford F800 truck V8 7.0L and other vehicles
- Material: Cast iron housing, stamped steel impeller
- Condition: New
A coolant leak near the pump, a grinding or whining noise from the engine, or an engine that runs hot can mean a pump is wearing out. Overheating has other causes too, so before you replace the pump, look it over with the engine off and cool for coolant residue and for play in the shaft.
Fits
The listing is for a wide range of Ford models and also covers the 1980-1988 Ford F-800 V8 6.1L, the 1980-1991 F-800 V8 7.0L, the 1990-1991 F-800 V8 6.1L, the 1980-1991 Ford F-700 V8 6.1L and the 1980-1998 F-700 V8 7.0L. Each of those trucks takes one pump. Driving something not named here? Look up its year and engine in the "Vehicles it fits" section.
Specifications
Fit and size
- Quantity per vehicle: 1
- Outlets: 3
- Drive type: accessory belt (not timing belt driven)
- Impeller rotation: standard
Build and materials
- Housing material: cast iron
- Impeller material: stamped steel
- Condition: new
- Warranty: Gates limited lifetime warranty
- Country of origin: China
In the box
One water pump and two gaskets. The pulley, fan clutch, back housing, and thermostat and housing are not included.
Frequently Asked Questions
Is the Gates 44019 water pump right for the 1991-1996 Ford F800 truck with the V8 7.0L?
Yes. Gates 44019 is listed for the 1991-1996 Ford F800 truck with the V8 7.0L. The "Vehicles it fits" section shows whether your truck's year and engine are covered too.
Does the Gates 44019 water pump come with gaskets?
Yes. Gates 44019 comes with two gaskets. The pulley, fan clutch, back housing, and thermostat and housing are not included.
Is this water pump timing belt driven?
No. This water pump is driven by an accessory belt and has three outlets.
How can I tell if this water pump's bearing or seal is wearing out?
Coolant stains around the pump, side-to-side play in the shaft with the engine off and cool, or a grinding noise while driving can mean the bearing or seal is wearing.
What testing does the Gates 44019 water pump get?
Every Gates 44019 gets a full functional test of its seals and bearings, and both the casting and the finished pump are leak tested.
