Gates HVAC Heater Hose P/N:12375
Gates 12048 heater hose for the 2009-2010 Dodge Journey V6 3.5L carries engine coolant through the heating circuit. This Gates heater hose is molded to shape for the engine-to-oil-cooler run.
A coolant drip, a cracked, swollen or soft hose, or a falling coolant level can mean a heater hose is failing; look at the hose and check the level only with the engine cool. Before you replace the hose, rule out a loose clamp or a weeping fitting at either end as the source of the leak.
This is a direct-fit 2009-2010 Dodge Journey V6 3.5L heater hose replacement, and the vehicle takes one hose.
Fit and size
Build and materials
Interchange: 14877S · 5058544AC · 13048
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is this the Dodge Journey heater hose for the 2009-2010 V6 3.5L?
Yes. Gates 12048 is listed for the 2009-2010 Dodge Journey V6 3.5L, and the vehicle takes one hose.
What is the Gates molded heater hose made of?
Gates 12048 has an EPDM tube, synthetic fiber knit reinforcement and an EPDM cover. The molded hose measures 15 mm (0.59 in) inside diameter at both ends.
Can this HVAC heater hose carry fuel or oil?
No. This hose is not for fuel or oil transfer; it is made for coolant, water and air applications and is also approved for marine use.
Should I swap the hose clamps when installing Gates 12048?
Yes. Hose clamps should be replaced every time a new hose goes on, and that includes this heater hose.
Does Gates 12048 replace part number 5058544AC?
Yes. 5058544AC is one of the numbers this hose replaces, along with 14877S and 13048.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.