Heater Hose for 2001-2003 Lexus RX300 - Gates 12267

$113.99
Sold out

Vehicles this part fits

    Part number: 12267
    UPC: 770075744610
    Condition: New
    Weight: 5.70 LBS
    Item Package Quantity: 1
    $113.99

    Out of stock

    Have questions?

    Gates HVAC Heater Hose P/N:12267
    Gates HVAC Heater Hose P/N:12267
    $113.99
    $113.99

    Gates 12267 heater hose for the 2001-2003 Lexus RX300 V6 3.0L carries hot engine coolant for the cabin heater. The Gates heater hose is molded at the factory to suit today's smaller, tighter engine compartments.

    • Gates molded heater hose built from an EPDM tube, synthetic fiber knit reinforcement and an EPDM cover
    • Engineered to resist electrochemical degradation, the leading cause of hose failure
    • Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
    • Temperature range of -40°F to 275°F (-40°C to 135°C)
    • Can be used for coolant, water and air applications, and is approved for marine applications

    Quick facts

    • Part: Gates 12267 heater hose
    • Also called: HVAC heater hose
    • Fits: 2001-2003 Lexus RX300 V6 3.0L
    • Position: heater inlet
    • Material: EPDM
    • Condition: New

    A cracked, soft or bulging hose, or coolant dripping near it, can mean the hose is wearing out. Look only when the engine is cool. A loose clamp, a leaking heater core or a weeping water pump can be behind coolant loss too, so find the cause before you buy a hose.

    Fits

    It fits the 2001-2003 Lexus RX300 V6 3.0L. This listing is one hose for the heater inlet, and that vehicle takes one.

    Specifications

    Fit and size

    • Position: heater inlet
    • Quantity per vehicle: 1
    • Inside diameter, both ends: 16 mm (0.62 in)
    • Centerline length: 695 mm (27.38 in)

    Build and materials

    • Construction: molded
    • Material: EPDM
    • Condition: New
    • Country of origin: United States

    Installation notes

    • Replace the hose clamps each time a new coolant hose is installed.
    • Not for fuel or oil transfer applications.

    Interchange: 16743M · F10555 · 13267 · 8724548060

    Product information is for general reference and may contain errors. See our Disclaimer.

    This part cross-references / interchanges with the following part numbers:

    16743M, F10555, 12267, 13267, 8724548060

    Frequently Asked Questions

    Does the Gates 12267 heater hose fit the 2001-2003 Lexus RX300 V6 3.0L?

    Yes. Gates 12267 is listed for the 2001-2003 Lexus RX300 V6 3.0L, and that vehicle takes one hose.

    Can this Gates HVAC heater hose be used for water or air as well as coolant?

    Yes. Gates 12267 can be used for coolant, water and air applications and is also approved for marine applications. It is not for fuel or oil transfer.

    What are the inside diameter and length of this heater hose?

    Both ends have a 16 mm (0.62 in) inside diameter, and the centerline length is 695 mm (27.38 in).

    What temperature range does this EPDM heater hose cover?

    The temperature range is -40°F to 275°F (-40°C to 135°C). The hose also meets SAE 20R3 Type EC Class D-1 and D-2.

    Should I replace the hose clamps when I install a new heater hose?

    Yes. Hose clamps should be replaced each time a new coolant hose is installed, so plan on new ones for this Gates hose.

    Reviews

    No reviews yet — be the first to review this product.

    Write a Review