Heater Hose for 1991-1993 Ford Mustang & More - Gates 18732

$39.99

Vehicles this part fits

    Part number: 18732
    UPC: 072053179927
    Condition: New
    Weight: 1.07 LBS
    Item Package Quantity: 1
    $39.99
    Adding to cart… The item has been added

    Have questions?

    Gates HVAC Heater Hose P/N:18732
    Gates HVAC Heater Hose P/N:18732
    $39.99
    $39.99

    Gates 18732 heater hose for the 1991-1993 Ford Mustang 4-cylinder 2.3L and other vehicles carries engine coolant to and from the heater. This Gates heater hose is factory-molded to fit today's smaller, tighter engine compartments.

    • Molded construction with an EPDM tube, synthetic fiber knit reinforcement and an EPDM cover
    • Designed to resist electrochemical degradation, a leading cause of hose failure
    • Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
    • Temperature range of -40 °F to 275 °F (-40 °C to 135 °C)
    • Usable for coolant, water and air applications, and approved for marine applications

    Quick facts

    • Part: Gates 18732 heater hose
    • Also called: HVAC heater hose
    • Fits: 1991-1993 Ford Mustang 4-cylinder 2.3L and other vehicles
    • Position: heater to pipe, heater to water pump, oil cooler to pipe-5
    • Material: EPDM
    • Condition: New

    A worn or failing heater hose can show up as a coolant leak, a soft or swollen hose, or cracks in the cover, though a loose clamp or the water pump can be behind a leak as well.

    Fits

    Gates 18732 is listed for a wide range of Ford, Chevrolet and Audi models, including the 1995-1998 Audi A6 V6 2.8L and the 1995-1998 Audi A6 Quattro V6 2.8L. If your car is not named here, look for it in the "Vehicles it fits" section.

    Specifications

    Fit and size

    • Position: heater to pipe, heater to water pump, oil cooler to pipe-5
    • Quantity per vehicle: 1
    • Centerline length: 577 mm (22.7 in)
    • End 1 inside diameter: 16 mm (0.62 in)
    • End 2 inside diameter: 18 mm (0.72 in)

    Build and materials

    • Material: EPDM
    • Construction: molded, EPDM tube, synthetic fiber knit reinforcement, EPDM cover
    • Standard: SAE 20R3 Type EC Class D-1 and D-2
    • Temperature range: -40 °F to 275 °F (-40 °C to 135 °C)
    • Condition: New
    • Country of origin: United States

    In the box

    One heater hose. This listing holds one hose, and the vehicle takes one.

    Installation notes

    • Replace the hose clamps each time a new coolant hose is installed.
    • Do not use this hose for fuel or oil transfer applications.

    Interchange: F1ZZ 18472 A
    18031L · 87870 · E87870 · 10198891 · 10211368 · 63177 · 10732

    Product information is for general reference and may contain errors. See our Disclaimer.

    This part cross-references / interchanges with the following part numbers:

    18031L, 18732, 87870, E87870, F1ZZ 18472 A, 10198891, 10211368, 63177, 10732

    Frequently Asked Questions

    Is Gates 18732 the right heater hose for a 1991-1993 Ford Mustang 4-cylinder 2.3L?

    Yes. Gates 18732 is listed for the 1991-1993 Ford Mustang 4-cylinder 2.3L, and the vehicle takes one hose.

    Is Gates 18732 the right heater hose for a 1995-1998 Audi A6 Quattro V6 2.8L?

    Yes. Gates 18732 is listed for the 1995-1998 Audi A6 Quattro V6 2.8L. For any other car, find it in the "Vehicles it fits" section.

    What is the Gates molded heater hose made of?

    Gates 18732 has an EPDM tube, synthetic fiber knit reinforcement and an EPDM cover. It meets SAE 20R3 Type EC Class D-1 and D-2 specifications.

    Is this HVAC heater hose OK for fuel or oil lines?

    No. Do not use this heater hose for fuel or oil transfer. It is made for coolant, water and air applications and is also approved for marine use.

    What are the hose diameters and length on Gates 18732?

    Gates 18732 has a 16 mm (0.62 in) inside diameter on one end and 18 mm (0.72 in) on the other, with a centerline length of 577 mm (22.7 in).

    Reviews

    No reviews yet — be the first to review this product.

    Write a Review