Heater Hose for 1985-1991 Toyota 4Runner & More - Gates 18755

$25.99

Vehicles this part fits

    Part number: 18755
    UPC: 072053177947
    Condition: New
    Weight: 0.25 LBS
    Item Package Quantity: 1
    $25.99
    Adding to cart… The item has been added

    Have questions?

    Gates HVAC Heater Hose P/N:18755
    Gates HVAC Heater Hose P/N:18755
    $25.99
    $25.99

    Gates 18755 heater hose for the 1985-1989 Toyota 4Runner 4-cylinder 2.4L, the 1990-1991 4Runner V6 3.0L and other vehicles carries engine coolant through the heater circuit. This Gates molded heater hose is factory-molded in an OEM style to fit smaller, tighter engine compartments. It is also called an HVAC heater hose.

    • EPDM tube and EPDM cover over a synthetic fiber knit reinforcement
    • Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
    • Temperature range of -40 °F to 275 °F (-40 °C to 135 °C)
    • Engineered to resist electrochemical degradation, the leading cause of hose failure
    • Can be used for coolant, water and air applications, and is also approved for marine applications

    Quick facts

    • Part: Gates 18755 heater hose
    • Also called: HVAC heater hose
    • Fits: the 1985-1989 Toyota 4Runner 4-cylinder 2.4L, the 1990-1991 4Runner V6 3.0L and other vehicles
    • Position: Valve to engine, tee-1 to auxiliary heater pipe-1
    • Material: EPDM
    • Condition: New

    A cracked, swollen or leaking heater hose can mean coolant loss. Before you replace the hose, rule out a loose clamp, a leaking heater valve or a heater core problem, because those can let coolant escape too.

    Fits

    It fits the 1985-1989 Toyota 4Runner 4-cylinder 2.4L and the 1990-1991 4Runner V6 3.0L, and also the 1985-1989 Toyota Pickup 4-cylinder 2.4L and the 1990-1991 Pickup V6 3.0L.

    Specifications

    Fit and size

    • Position: Valve to engine, tee-1 to auxiliary heater pipe-1
    • Quantity per vehicle: 1
    • Centerline length: 257 mm (10.1 in)
    • End 1 inside diameter: 16 mm (0.62 in)
    • End 2 inside diameter: 18 mm (0.69 in)

    Build and materials

    • Construction: Molded
    • Material: EPDM
    • Reinforcement: Synthetic fiber knit
    • Condition: New
    • Country of origin: United States

    In the box

    One heater hose. This listing holds one hose, and these vehicles take one.

    Installation notes

    • Replace the hose clamps each time a new heater hose is installed.
    • Do not use this hose for fuel or oil transfer.

    Interchange: 14092S · 87639 · B87639 · 64398 · 10755 · 8724589286

    Product information is for general reference and may contain errors. See our Disclaimer.

    This part cross-references / interchanges with the following part numbers:

    14092S, 18755, 87639, B87639, 64398, 10755, 8724589286

    Frequently Asked Questions

    Does Gates 18755 work as a 4Runner heater hose on the 1990-1991 Toyota 4Runner V6 3.0L?

    Yes. Gates 18755 is listed for the 1990-1991 Toyota 4Runner V6 3.0L, and it also fits the 1985-1989 Toyota 4Runner 4-cylinder 2.4L.

    Is this a Toyota Pickup heater hose for the 1985-1989 Toyota Pickup 4-cylinder 2.4L?

    Yes. Gates 18755 fits both the 1985-1989 Toyota Pickup 4-cylinder 2.4L and the 1990-1991 Pickup V6 3.0L, one hose each.

    Is this Gates heater hose molded, and what is it made of?

    Yes. It is a factory-molded hose with an EPDM tube and EPDM cover over a synthetic fiber knit reinforcement.

    What are the inside diameters and length of Gates 18755?

    Gates 18755 has a 16 mm (0.62 in) inside diameter on end 1 and 18 mm (0.69 in) on end 2, with a centerline length of 257 mm (10.1 in).

    Can this heater hose be used for fuel or oil lines?

    No. Do not use it for fuel or oil transfer. It is made for coolant, water and air applications and is also approved for marine applications.

    Reviews

    No reviews yet — be the first to review this product.

    Write a Review