Heater Hose for 2000-2002 Subaru Outback & More - Gates 19131

$43.99

Vehicles this part fits

    Part number: 19131
    UPC: 072053487978
    Condition: New
    Weight: 0.84 LBS
    Item Package Quantity: 1
    $43.99
    Adding to cart… The item has been added

    Have questions?

    Gates HVAC Heater Hose P/N:19131
    Gates HVAC Heater Hose P/N:19131
    $43.99
    $43.99

    Gates 19131 heater hose for the 2000-2002 Subaru Outback H4 2.5L and other vehicles carries engine coolant between the heater and the pipe.

    • Gates molded heater hose with a factory-molded shape for today's smaller, tighter engine compartments
    • Can be used for coolant, water and air applications and is also approved for marine applications
    • Engineered to resist electrochemical degradation, the leading cause of hose failure
    • EPDM tube, synthetic fiber knit reinforcement and EPDM cover
    • Meets SAE 20R3 Type EC Class D-1 and D-2 specifications, with a range of -40 °F to 275 °F (-40 °C to 135 °C)

    Quick facts

    • Part: Gates 19131 heater hose
    • Also called: HVAC heater hose
    • Fits: the 2000-2002 Subaru Outback H4 2.5L and other vehicles
    • Position: Heater to pipe-1
    • Material: EPDM
    • Condition: New

    A heater hose that is cracked, soft, swollen or seeping coolant can be due for replacement, and a sweet smell from the engine bay or a dropping coolant level can come from leaks elsewhere too. Before you replace the hose, rule out a loose clamp or a leak at the pipe or heater fitting it connects to.

    Fits

    This heater hose fits the 2000-2002 Subaru Outback H4 2.5L, the 1995-1999 Subaru Legacy H4 2.2L and the 1996-1999 Legacy H4 2.5L.

    Specifications

    Fit and size

    • Position: Heater to pipe-1
    • Quantity per vehicle: 1
    • Centerline length: 16.6 in (422 mm)
    • End 1 inside diameter: 0.6 in (15 mm)
    • End 2 inside diameter: 0.6 in (15 mm)

    Build and materials

    • Construction: molded
    • Material: EPDM
    • Condition: New
    • Country of origin: United States

    In the box

    One heater hose. The quantity per vehicle is one.

    Installation notes

    • Replace the hose clamps each time a new coolant hose is installed.
    • Not for fuel or oil transfer applications.

    Interchange: 16247M · F10817 · 64331 · 11131 · 72421AC000

    Product information is for general reference and may contain errors. See our Disclaimer.

    This part cross-references / interchanges with the following part numbers:

    16247M, 19131, F10817, 64331, 11131, 72421AC000

    Frequently Asked Questions

    Does the Gates 19131 heater hose fit the 1996-1999 Subaru Legacy H4 2.5L?

    Yes. Gates 19131 fits the 1996-1999 Subaru Legacy H4 2.5L, and it also fits the 1995-1999 Legacy H4 2.2L.

    What temperature range can this Gates heater hose handle?

    This hose handles -40 °F to 275 °F (-40 °C to 135 °C). The tube and cover are EPDM, with synthetic fiber knit reinforcement.

    Is Gates 19131 a 1/2 inch heater hose?

    No. Gates 19131 has a 15 mm (0.6 in) inside diameter at both ends and a centerline length of 16.6 in (422 mm).

    Can this HVAC heater hose carry fuel or oil?

    No. Do not use it for fuel or oil transfer. It is made for coolant, water and air applications and is also approved for marine use.

    Do I need new clamps with this molded hose?

    Yes. Replacing the hose clamps each time a new coolant hose is installed is the recommended practice, so plan on new ones. This listing is one heater hose.

    Reviews

    No reviews yet — be the first to review this product.

    Write a Review