Gates 22624 heater hose for the 1997-2000 Ford E-150 Econoline V8 4.6L or 5.4L and other vehicles carries hot engine coolant between the engine and the heater. This molded Gates heater hose is a modular assembly with one integrated branch.
- Gates Modular Coolant Hose line with an EPDM tube and synthetic fiber knit reinforcement
- Heat-, ozone- and chemical coolant-resistant EPDM cover
- Specifically engineered materials resist collapse under vacuum
- Engineered to resist electrochemical degradation, the leading cause of hose failure
- Meets SAE 20R3 EC Class D1 under 25 mm (1 in.) ID
Quick facts
- Part: Gates 22624 heater hose
- Also called: HVAC heater hose
- Fits: 1997-2000 Ford E-150 Econoline V8 4.6L or 5.4L and other vehicles
- Position: Heater to pipe-1, heater to intake manifold, heater to pipe-2
- Material: EPDM, plastic
- Condition: New
A heater hose that is wearing out can show coolant seepage near its ends, a soft or swollen cover, cracks, or weak heat from the vents. With the engine cool, look the hose over for those marks. These signs alone do not prove the hose is at fault; a clogged heater core can give weak heat as well.
Fits
Besides the vehicle in the opening line, this heater hose fits the 1997-2000 Ford E-150 Econoline Club Wagon V8 4.6L or 5.4L and the 1997-2000 Ford E-350 Econoline Club Wagon V8 5.4L or V10 6.8L. If your vehicle is not one of these, look up its year and engine on the Buyer's Guide tab.
Specifications
Fit and size
- Position: heater to pipe-1, heater to intake manifold, heater to pipe-2
- Quantity per vehicle: 1
- Centerline length: 38.53 in (979 mm)
- End 1 inside diameter: 0.63 in (16 mm)
- End 2 inside diameter: 0.63 in (16 mm)
- End 3 inside diameter: 0.63 in
- Branch quantity: 1
Build and materials
- Material: EPDM, plastic
- Construction: molded, modular
- Quick-connect fittings: 0
- Spring: none
- Temperature range: -40 °F to +257 °F (-40 °C to +125 °C)
- Condition: New
- Country of origin: United States
In the box
1 Gates heater hose with its integrated branch. A vehicle takes one of these hoses.
Installation notes
- Replace the clamps each time a new heater hose is installed.
- Not for fuel or oil transfer applications.
Interchange: F7UZ 18472 HA · F7UZ 18472 PA · F7UZ 18472 UA · F7UZ 18472 UB · XC2H 18266 PA · XC2H 18266 UA
18271L · F11141 · 64346 · 9257
This part cross-references / interchanges with the following part numbers:
18271L, 22624, F11141, F7UZ 18472 HA, F7UZ 18472 PA, F7UZ 18472 UA, F7UZ 18472 UB, XC2H 18266 PA, XC2H 18266 UA, 64346, 9257
