Heater Hose for 1997-1999 Chevrolet Malibu & More - Gates 22944

$144.99

Vehicles this part fits

    Part number: 22944
    UPC: 072053576528
    Condition: New
    Weight: 0.91 LBS
    Item Package Quantity: 1
    $144.99
    Adding to cart… The item has been added

    Have questions?

    Gates HVAC Heater Hose P/N:22944
    Gates HVAC Heater Hose P/N:22944
    $144.99
    $144.99

    Gates 22944 heater hose for the 1997-1999 Chevrolet Malibu 4-cylinder 2.4L and other vehicles carries engine coolant on the heater to bypass valve assembly run. This Gates molded heater hose is also called an HVAC heater hose.

    • Gates Modular Coolant Hose design with four built-in branches
    • Materials engineered to resist collapse under vacuum
    • Built to resist electrochemical degradation, the leading cause of hose failure
    • EPDM tube with synthetic fiber knit reinforcement and a heat-, ozone- and chemical coolant-resistant EPDM cover
    • Temperature range of -40 °F to +257 °F (-40 °C to +125 °C)

    Quick facts

    • Part: Gates 22944 heater hose
    • Also called: HVAC heater hose
    • Fits: 1997-1999 Chevrolet Malibu 4-cylinder 2.4L and other vehicles
    • Position: Heater to bypass valve assembly
    • Material: EPDM, plastic
    • Condition: New

    Coolant drips under the hood, a soft or bulging hose, cracks in the cover or a dropping coolant level can mean this hose is wearing out. Before you replace it, rule out a loose clamp or a leak at another cooling-system part, because the drip may start there.

    Fits

    This hose fits the 1997-1999 Chevrolet Malibu 4-cylinder 2.4L and the 1999-2001 Oldsmobile Alero 4-cylinder 2.4L. This listing is one hose, and the 1997-1999 Chevrolet Malibu 4-cylinder 2.4L takes one.

    Specifications

    Fit and size

    • Position: heater to bypass valve assembly
    • Quantity per vehicle: 1
    • Centerline length: 18.8 in (478 mm)
    • Inside diameter, all four ends: 19 mm (0.75 in)
    • Branches: 4

    Build and materials

    • Construction: molded, modular
    • Material: EPDM, plastic
    • Standard: SAE 20R3 EC Class D1 (hoses under 25 mm ID)
    • Contains spring: no
    • Condition: new
    • Country of origin: United States

    In the box

    One heater hose with four branches built in.

    Installation notes

    • Replace the clamps each time a new coolant hose is installed.
    • Do not use this hose for fuel or oil transfer.

    Interchange: 22513M · 64348 · E88481 · 88481 · 22619322 · 22646788 · 9579

    Product information is for general reference and may contain errors. See our Disclaimer.

    This part cross-references / interchanges with the following part numbers:

    22513M, 22944, 64348, E88481, 88481, 22619322, 22646788, 9579

    Frequently Asked Questions

    Is the Gates heater hose 22944 right for the 1997-1999 Chevrolet Malibu 4-cylinder 2.4L?

    Yes. Gates 22944 fits the 1997-1999 Chevrolet Malibu 4-cylinder 2.4L, and the 1999-2001 Oldsmobile Alero 4-cylinder 2.4L takes it too. It runs from the heater to the bypass valve assembly.

    Is this Gates 3/4 inch heater hose 19 mm inside?

    Yes. Gates 22944 has a 19 mm (0.75 in) inside diameter at all four ends, with a centerline length of 18.8 in (478 mm).

    Does this heater hose have quick connectors?

    No. This listing is one molded hose with four branches and no quick-connect fittings.

    Should I replace the clamps when I install this heater hose?

    Yes, plan on new clamps whenever a new coolant hose goes on. Do not use this hose for fuel or oil transfer.

    How do I spot a failing heater hose on the heater to bypass valve assembly run?

    With the engine off and cool, look for cracks, a soft or swollen cover, or coolant residue around the branches. A shop can pressure-test the cooling system if the source of a leak is unclear.

    Reviews

    No reviews yet — be the first to review this product.

    Write a Review